Hatch Shade

Brian Suhl

Member
exMember
Joined
May 9, 2001
RO Number
4517
Messages
168
I have a round hatch on the deck over the birth and it is white frosted glass and round. I think it is Bomar brand on my '06 Silverton. We have been using aluminum foil wraped around the screen to block out the morning sun but there has to be a better way. Has anyone solved this problem without having to go out on the bow at midnight to install a canvas cover?
 
Thanks but will not work on my round hatch that is inset several inches into the headliner. The inset is twice the diameter of the hatch and 45s to the size of the hatch. Nice product though.
 
Remove the screen at night & slip a piece of black cotton duck or canvas cut to fit ,on top of it, then replace the screen with the fabric facing up towards the glass & the AM sunshine will not peek through until you remove it for the day. Beats the foil.
 
On my old 26' with a very long hatch, we shut a heavy black plastic trash bag in the hatch at night, wrked well if a bit tackey looking.
 
For my 1986 34C Silverton I had screens that used velcro to hold them to the hatches. I bought some material and sewed velcro to the cloth and just stick them up when I want to the light blocked. Works very well and not a lot $$$$ to make them.
 
i had sunbrella hatch covers made by the local canvas shop. i use them to keep light out when the boat is not in use so the interior does not get as hot or fade the interiors. they work well as a sunshade. i believe the round ones i have are also made by bomar and there is a round screen that fits in the interior of the opening with 3 levers the swing out, the boat came with 3 matching black out fabrics that are the same size as the screens and i assume these too are bomar products.
 
I bought a very cheap shiny windshield reflector from Wally Mart for about $6, the kind that is bright shiny that you put inside your car windshield when you are parked for a long time too prevent your car from over heating. I used the screen for patterns and cut with scissors pieces of the reflector material to make covers. Did the whole boat with one reflector.Very handy, works great and cheap.
 
Back
Top