quote:
Originally posted by cmagic99
I don't know your specific vessel, but I converted my manual Jabsco head to a Vacuflush head on mine and was able to reuse much of the existing plumbing. The biggest decision, other than making sure the new head will fit properly, will be whether or not to use fresh water or raw water since many of the electric head models can be either fresh or raw. I assume your manual head is configured to use raw water as most are. The Vacuflush I installed only used fresh water, so I had to tee into my pressurized water system to provide the flush water for the head. This was very easy to do and the discharge hoses from the manual head were a direct fit to the new Vacuflush head. You will need to make sure you can orientate the water supply and discharge fittings on the base on the new electric head to match your existing plumbing, but my understanding is that most models will allow you to rotate the base to re-orientate the fittings according to your needs.