How to operate

Hmmmm.....did you post the correct picture? I see nothing which resembles a depth finder......
 
Oops wrong picture, I'll try again.

cleaning007.jpg
 
I'd imagine for normal use, if it is working correctly, just turn the left knob just to ON and don't worry about anchor scan(?). Right knob would just set an alarm to sound at any depth on the panel you choose but usually would be left on 100 so it would not sound when shallower. Does it power up ? As with any sounder, leave it off when out of water.
 
It powers up sometimes. When I turn it on it may or may not show a number. As I putter along a number will pop up and stay or not stay. As i play with the alarm side, I seem to get more action out of the display, although not necessarily accurate to what I know the river to be.
I have no idea what the anchor scan numbers are for.
 
Dials????? Got to be OOOOOOLD. You can get cheapies for $100.
 
The Impulse depth finder usually fails because of the transducer. Unfortunately they are 160 khz devices-- I believe the only manufacturer that currently makes them is raysonics. There is an impulse marine repair facility in CA the still repairs them, however the cost of repair may exceed the cost of a new depthfinder.
 
Back
Top