Hull Cleaner

dhs

Member
Joined
Sep 6, 2008
RO Number
30706
Messages
47
What's everyone's product of choice for cleaning the hull after it's been in the water all summer?

On/Off has been recommended to me but after reading some articles about how environmentally unfriendly it is I am hesitant to use it.

I will have the ability to clean it as soon as it comes out if that makes a difference.

Thanks!
 
I use Sno-bol toilet bowl cleaner to get the stains off. Use it full strength, don't dilute it with water.
 
All of these products are not environmentally friendly. Clean the hull on the hard and be sure the rinse water does not flow into the body of water.

To avoid all of this in the futre, put your boat on a lift during the time you have it in the water! Saves a ton of labor and keeps the hull looking great!
 
I tried the on/off on my hall and it didn't work to well at getting the yellow out. I also tried acid tone since I had a bottle at the house, no luck there either. Just the other day I picked up a small tub of Slimy Grimy at my local marina, they say it works great. I haven't had a chance to use it yet but I hope so. The tub is to be mixed with 3 gals of hot water for use. My boat is kept on a trailer in my driveway and the hull is starting to look bad (yellow from the water line down). After I clean it I am going to wax it good and try to wipe it more often after getting out of the water lol.
Good Luck with it!
 
"To avoid all of this in the futre, put your boat on a lift during the time you have it in the water! Saves a ton of labor and keeps the hull looking great!"

Y'know Liz, I tried that for awhile, but I dunno, it kind of turns a casual day on the water into a production...

P1010124.JPG
 
Muriatic acid is really nasty stuff...

Davis FSR is a true miracle product it comes to removing the ICW mustache or the yellow/tan stains on the hull near the waterline. wipe it on with a sponge and the yellow stain goes away in seconds, and I really mean in seconds. no scrubbing, just rinse.

great stuff!
 
I have used for many years a product called Slimey Grimey. Most Marinas in western NY carry it but i am not sure about other parts of the country.

Liz, I agree about keeping the boat on the lift in fact that is where mine is. However I am amazed by the number of Marina's who do not allow boat lifts. A lift is not an option for many.
 
FSR is oxalic acid in a gel so it does not run off too quickly. Good stuff. On/Off is a more agressive acid, thought I can't remember what. Look on the bottle of the products you are trying to see what is in them.

Hate to say it, but if you leave it in the water, you might as well bottom paint.
 
The sides of the hull or the bottom? ON/OFF is good for the bottom, FSR or a light polishing compound for the sides.
 
I used to use On/Off, it definitely works, but man is that stuff nasty. I beleive it has Hydrochloric acid in it. The warning about keeping it off of trailers etc is no joke, you can practically hear the galvonized trailer sissle if a drop gets on it. This year I tried Star Brite SeaSafe hull cleaner, I'm not sure what it has in it, definitley milder than On/Off. For me it worked great, my boat stays on a lift for the most part, I don't get any growth, but I do get some brown staining.
 
quote:

Originally posted by caltexfla

Y'know Liz, I tried that for awhile, but I dunno, it kind of turns a casual day on the water into a production...






George,

Were you in the slings at the Anchor Bay East just south of Baltimore?
 
Thanks for all of the great suggestions. Since this is the first year boating I'm not sure what to expect when it comes out in a few weeks.

I see reading the MSDS for FSR that it's 91% Non-Toxic. I think I'll start with that. And BoatFix carries it!

Thanks again. I'll post the results...
 
Kurt, yep, there in Dundalk. They have been the primary yard for the boat since well before I owned it. Nice people; good food and drink at the Hard Yacht cafe on site. We really missed going up there this year.

Think I'll try some of that FSR stuff myself on the Whaler.
 
The Carbon Wife Unit tried toilet cleaner this morning on our "Neuse Beard" and she says it didn't do squat. It wasn't Sno-Bol brand... Clorox if memory serves. Guess we'll look for Sno-bol or try Davis FSR.
 
We used Attood which is supposed to be environmentally friendly. After taking the boat south from NY on the ICW doing the Bahamas, and returning to the states, a couple of passes full strength with minor scrubbing took it all off. A good rinse and then washing with regular boat soap left the hull ready to wax.
 
On/Off has a gel( not really a gel but it is thicker that water) that works aswell as the liquid, It does not smell as bad and works good!
 
My routine.

Haul and yard pressure washes bottom.

For hull sides above water line

Boat Soap with a shot of Vinegar. Followed by a washing with Dawn Dish detergent. Followed by 3m marine cleaner wax.

Wait til spring and repeat process.
 
caltexfla.......you need a smaller boat! LOL

Padraig......true. Where I boat, many marinas will only allow Air Docks. That is because they are not bolted to the dock which may cause damage. Also an Air Dock is easy to take with you to another slip.

We have one marina which now rents slips including air docks! I like that idea.
 
Back
Top