Hypalon Glue

GonzoF1

Member
Joined
Jun 29, 2009
RO Number
31468
Messages
266
I need to fix a few things on my dinghy. The davit hooks and bumper rail are coming loose. Need to do quite a bit of gluing. I only found a tiny tube at WM, but need far more than that. Tips on what to use and the process?

Thanks!
 
Hey, call "Inflatable Boats of the Florida Keys" Marathon, FL, 305-743-7085. I had some leaks in my hypalon Achilles and from reading the repair instructions it looked very, very complicated. The lady sent me some very easy to use glue and bingo, done! She will tell you how in about fifteen seconds.
 
http://www.boatfix.com/shop3/store/viewItem.asp?idProduct=10888
 
What is the best way to get the old glue off? Right now I'm trying 100-grit sandpaper.
 
Often a heat gun (used very carefully) and a putty knife will remove the old glue. Sand paper works. Methyl Ethel Ketone (solvent--not peroxide) is also a good solvent for some glues, and for cleaning the inflatable--inflatable and toxic fumes. But available at Home Depot. Do mechanical removal first.

Clifton Adhesive is used by river rafters for their repair of hypalon boats.
 
Do you need to get it all the way back down to the gray or can you just take off the thick stuff an make sure the surface is rough for re application? I'm afraid I'm wearing it out. Like I'll make a weak spot in the fabric or somehow degrade the structural integrity.

(Thanks to all BTW)
 
New glue will not bond to old glue, get that off first!
 
I though there were two types of glue, one for hypalon dinghy and one for regular rubber dinghy. I saw a shop many years ago gluing a rubber rail to a hypalon dinghy. He apply the rubber glue to the rail and the hypalon glue to the dinghy and then put them together. He claim it was the only way. But again this was 8 years ago. Maybe there is a glue for both types of materials.....
 
Back
Top