I have exciting news

Woodsong

exMember
Member
exMember
Joined
Jan 29, 2006
RO Number
20095
Messages
2,559
Actually, extremely exciting news.....

Helm.jpg


Hull.jpg


Table.jpg


Bridgehelm.jpg


Door-1.jpg


Instruments.jpg


Stateroomwall.jpg
 
You're going on a three hour tour with Gilligan and the Skipper?
 
You've taken up a hobby of photographing wooden boat parts at close distance?
 
Either your building a boat one wooden componant at a time from the inside out and your showing us the progress you've made so far or your revealing or should I say teasing us with what appears to be details from a very beautiful finished boat that you probably have just purchased and as the pictures show there's lots of wood on it. I might guess than that wood is very important to you hence the name... Woodsong.
 
It's 2:25. AM or PM unknown as it is a chronometer wannabe with the requisite accompanying barometer. It'll do 60 MPH or 6000 RPM's; I can't tell from the gauge exactly what it is. It doesn't match the wannabe chronometer with the requisite accompanying barometer. The speakers need new grilles. The cabinet doors have locks in different positions to confuse the farque out of you when you drink. The door finishes do not match which leads me to believe this is a project of some sort.

If it did not appear to have a lower helm station mounted to the wainscot in your dining room, I'd say it was an older Grand Banks or the like trawler.
 
I'm guessing flybridge trawler, possible sundeck. Late 1980s, Taiwan built.
 
You've passed on Fall River and bought a forest where you're fashioning a flotation device, one piece at a time?
 
ok, ok....time to let the cat out of the bag. :) I have thus far held off in saying anything thus far...mostly b/c I have had quite a few "close calls" since we sold our silverton this past winter. We really had 2 types of boats we were interested in when we sold this winter. Option A) 45-50' semi-liveaboard to take between TN River and FL, etc. Option B) something about the same size as our 38 silverton but diesel powered, extremely fuel efficient, nice lines, etc. Several RO's graciously looked at a few boats for me that were near them but those boats were not to be. I flew to several paces around the SE- Kentucky, FL, etc. and had a couple of boats under contract that were out of state but upon going to view them it became obvious the brokers had not disclosed the boat's actual condition.
It seems in this process we have come full circle and the deal was right in front of us the entire time. Frankly, after the last potential boat fell through, I pretty well decided we would just remain boatless this year and hit it again this winter. However, plans have a way of working out despite what you think may happen and wow am I glad about that!
Basically, the big boat plans became very frustrating. Nothing to be had in the condition we wanted at the price that seemed right. And just as we were about to just say heck with it, we found our boat. She is not the big boat we had been looking for but I now very, very glad that none of those boats worked out and this little boat is really just perfect for us.

So what is it?? :)

1983 MMC/Monk 36 Trawler. MMC stands for "Miricle Marine Corp" which is a Taiwanese company that is basically the literally exact same layout/finish at the Monk 36 and it is an Ed Monk designed hull. The funny thing...she has been on the same dock my silverton had been on just 2 slips down the entire time! Small world, eh? I happened to talk to the seller last week and basically he told me he had to sell his trawler asap. After going through the boat with him and looking her over, he made us an offer I simply could not pass up...a phenomenal deal. She needs a few things but overall, is by far in the best shape I have seen for her vintage. Being kept under covered slip for the last 11 years on Lake Lanier and very light use I guess will lend itself to a sound boat. Her topsides need to be painted, add electronics, a soft spot on her bridge to address, and a few other things. Even factoring that in, she is a great deal and a once in a lifetime deal to say the least. We are tremendously excited. We are going to LOVE her 2 to 2.5 GPH fuel burn via her single 135hp Perkins. She also has an 8KW northern lights generator with low hours on both. I will be adding a thruster at some point I imagine as well. Reality is as well, once we get her refit this winter, she will be a fun platform for Lake Lanier or to bring to the TN River and seasonally cruise around here and there. If we cruise for a few weeks, leave somewhere, come back, cruise more, etc. the reality is that she will be a very economical vessel to do that in as well.

So yes, she needs a little bit of work but she is really fully functional right now as-is and she is in better shape than most other boats near her vintage by a longshot. Engine seems to run strong, everything powers right up, 2 heads, 2 staterooms, a super cozy salon, nice flybridge area, wide sidedecks, davit system in place off the platform and I'll probably work a deal on his 9.5 RIB. We'll fix the soft spot on the bridge and put down synthetic teak up there, paint the topsides, do the electronics, new canvas/eisenglass, clean her up, etc. The good thing is that the interior, while needing a little dusting/clutter control, is actually spotless. None of the typical water damage, no leaks, teak/holly sole literally throughout entire boat, 2 brand new HVAC units, newer fridge, new transmission seals, new cutlass bearings, dripless shaft seal, new batteries and charger, and best of all- 2 GPH! :) I also LOVE all her interior teak and tons more storage than my silverton ever, ever had. The layout fits an amazing amount of space for being just a 36. So, this Thursday we are closing on our new little trawler (only have to confirm engine compression but even if we have to get a new engine installed it's still a great deal so doing it just to check status in case I need to address it) and are looking forward to making her our cozy little home on the water, assuming I can figure out how to dock with a single screw! We will keep her on Lanier for a while since she is already there and then see what happens.

Pictures:
DSCF2927.jpg


DSCF2928-2.jpg


DSCF2929.jpg


DSCF2930.jpg


DSCF2936-1.jpg


DSCF2938.jpg


DSCF2939.jpg


DSCF2960-1.jpg


DSCF2960-1.jpg


P5010060.jpg


P5010061.jpg


DSCF2979.jpg


DSCF2980.jpg


And a video I shot this weekend of her interior:
http://www.youtube.com/watch?v=uqRNofECsWo

And exterior:
http://www.youtube.com/watch?v=MZ8wB21MdAs

You'll notice the fiberglass below the flybridge is discolored- this is due to having been sanded down by the previous owner in preparation to paint.

So closing Thursday, have a business deal closing Friday morning, then on the boat all weekend getting her scrubbed down and hanging out with our dock friends already on the dock!

It's funny how things work out. We really wanted the bigger boat but after an afternoon spent on this little 36 single screw trawler, I see that we have found our perfect little cozy boat in a package I had not been looking for but I am now extremely, extremely glad the other deals never came together. The funny thing is that the day after we signed the contract on the 36, the broker with a 47 Chris Craft Commander called me back to tell me his seller would do the deal on the price I submitted the week before (we had been $5k apart). As beautiful as that boat looked, I was extremely happy to tell him I already had my new boat lined up. Sellers- point there is that if you have a cash buyer in hand ready to fly over and do the deal, don't be silly- SIGN IT UP before something else comes along. In my instance, I am glad they debated it as it let us find a better deal on this happy little trawler.
 
Just a little bit excited, eh? Very pretty trawler. Best of luck with her.
 
Tony,

Good luck with the new purchase. Glad to see you finally found something.

Gary
 
She's a beauty..........the best of luck to you!
 
Nice call -
Congrats! She'll look good doing the great loop!
 
Great for you and your family Tony. That's my idea of a perfect boat---single engine diesel trawler.
 
Nice.

I think you'll find once you get used to a small single screw boat like that you won't be in a hurry to get a bow thruster. Although it my help at resale.

Are you going to be keeping it under cover? If not, keep a eye out for those leaks.

What's the PVC tube/horn thing next to the fire extinguisher?
 
Back
Top