inflatable questions

reinbilt

Member
exMember
Joined
Jul 3, 2007
RO Number
27174
Messages
61
Planning to purchase a new or used inflatable this fall and not sure what direction to go. This tender will be used with a Tiara 31 Open on trips in Lake Michigan and Huron and carried on the swim platform. Also plan to keep it on a trailer to use messing around on smaller lakes in the area. I'm thinking 8 to 9 foot w/ 2 to 5 hp. Would a RIB be too heavy to keep on the swim platform? If so, would wood bottom or air filled bottom be better? My weight 220 lbs., My wife 105. Zodiac is very popular around here.
 
R-I have a 11' apex rib, what I like is that its very stable, they are heavier than a pur inflatable but should be ok for the platform.
 
Since there are usually just two of us, we use a small inflatable (Merc) that is, I think 7 ft. 11 inches. It has an air floor and air keel and works great for us putting around and visiting other boats at anchor. This is our third inflatable and each one has gotten smaller and lighter. We keep it on the swim platform and after tying it there for a season, we bit the bullet and mounted a pair of (very pricey, it seemed to me) Weaver Davits. They are slick and make it easy to launch the inflatable in a hurry and retrieve it just as quickly. Our air floor is fine and is as hard as a rock since it gets twice the air pressure used in the side tubes. I love the RIBs not just because they go faster but because you can beach the inflatable anywhere and not damage it, but they are heavier and cost more. I guess it just depends on how much you want to spend and whether or not you want an extra 100 lbs or so hanging off the trailing edge of your swim platform.
 
Zodiac does apparently sell a 9' RIB that weighs about 99lbs w/o motor. Just remember it's not just the static weight to be concerned about on your platform , but the repetitive force of that weight in heavy seas.
 
You don't want a dink that's much wider than your swim platform. Otherwise you'll have problems docking.

If the dink is much larger than 9', the weight will require you to have snap davits to get it up out of the water when running.

The Hypolon Avons are a world better than the PVC Zodiacs.

There are two types used on the water. Those dinks that can be rolled up and those with hard floors. The roll ups are a little quicker to
set up, but won't plane. With enough engine, the hard bottom boats will plane. Make sure you can easily handle any motor that
you plan to mount and un mount on the water.(2 or 4 HP max)

You need to decide whether the dinghy is a light tender for going to and from the beach or as a sport boat capable of traveling distances.

I don't have davits and use a 9' Avon rolaway. When I want to get it up out of the water, it's light enough to pull out of the water
and put upside down on the bow. This is very quick to do.(low hassle factor)

Previously, I used a PVC Zodiac. I nearly lost my engine when the transom fell out, shortly after the 2nd picture was taken.

Ayala_Cove_05_08_06_120_Small.sized.jpg


Ayala_Cove_05_08_06_125_Small.sized.jpg


The old timers value a dink that rows well. For short distances, it's easier just to throw it into the water and row the short distance to shore.

Ayala_cove_Beach_trip_030_Small.sized.jpg
 
Our 10' has a high pressure air floor, rolls up easily for stroage and PLANES WELL with 2 adults & a yellow lab using a 9.9 two stroke Mercury (rebuilt to 12 hp)

RWS
 
We just picked a 9'6" hard bottom one up from Boaters World:

http://www.boatersworld.com/product/369106240.htm

with a 4 stroke Tohatsu 5 HP:

http://www.boatersworld.com/product/369103478.htm

Go with the hard bottom, much more stable IMHO. We keep ours on the boat, inflated (33' cruiser). It fits perfectly behind the helm plus it stays covered with the canvas on. The Mrs and I can pick it up with no problems.

I weigh 210, the Mrs is around 115 and it does great. We have had 4 adults on it and it moves along with no problem.
 
Thanks for all the replies!!! I'm liking the set up that chriscraft has. 8 foot air filled bottom with a 3 hp. The extra weight of a RIB on the swim platform would not bother me as much as the muscle power required to pull it out of the water even using the Weaver Davits that are designed for a RIB. Then your looking at wrestling a 70 or 80 lb. motor onto the transom to get the performance that you bought the RIB for in the first place. Avon sells what I'm looking for but I may check some other manufactures also. Thanks again.
 
If you are buying used then either get it really cheap or almost new. Inflatables have a finite lifespan and once they get to a certain point they no longer have any value at all. Kept out of the sun and properly cared for an inflatable can last 10 years. Poorly cared for it can be toast in as little as 5 years. Some brands have a history of coming apart at the seams after only a couple of years.

A RIB doesn't weight that much more than a wood (or similar material) floorboard model. More, yes, but once the weight of the inflatable passes 100 pounds you aren't going to be picking it up and man handling it anyway so another 20 pounds isn't a big deal. The hard bottom of a RIB cab be well worth the extra weight and money.

If you want to row, the RIB is the best way to go. The hard keel allows the boat to track well so all your effort goes towards getting you to where you want to go instead of zig-zagging. The RIB is also reasonably sea-worthy even with a tube deflated (just don't sit on that side.....)

The real down side of a RIB is that it won't break down into a smaller package for transport. I don't find that to be a problem. The wooden floor model that I had before my RIB would take me a couple of hours, a six pack of beer and a lot of colorful language to get put back together after I took it apart.

With a 5 Hp or less you will be "putting" where ever you go. If you bump up to 10 Hp you can Zip! Two or three adults in a RIB with a 10 Hp can fly along at 20 MPH or more. I can even pull a wakeboarder behind my 11' RIB with my 9.9 Nissan. Here is a link to a little video showing it (note that the rider is ~190 lbs.....)

http://rodm7.tripod.com/

The down side of a larger motor is that they get pretty heavy. While it may be okay for carrying from point A to point B the real issue is when you have to muscle the motor on and off the dinghy, especially if the water isn't dead calm. If you have any kind of hoist that can lift the motor over the side and lower it down it would help a lot.

For a long time I simply tipped my inflatable up on the swim platform. I would wrap a pair of ropes over the top, feed them under the bottom then tie to the swim platform. Two people heaving on the lines from inside the boat could pull it up onto the platform and then up on edge. Later I installed the davit system, which worked a lot better. They hold the dinghy off the back of the platform so you could still go out on it if you needed to.

Like Monterey said, don't get your dinghy longer than your boat is wide, you don't want it to serve as a fender when you come into docks.

I have owned three different inflatables. My current boat, an Achilles hard bottom, is the one I have enjoyed the most. I have abused that boat so badly and it has taken it all in stride. It is about 7 years old now, and accept for anchor flukes ripping the pontoon incident the tubes have held up fine.

Rod
 
Rod,

Good points!! I do plan to buy new. My beam is 12 foot so a 8 to 9 foot tender should fit okay. I think the davits that Weaver makes that attach to the inside fiberglass would make pulling the boat up out of the water fairly easy but a 10 hp. motor would be a real pain to put on and take off. Really enjoyed the video.
 
Inflating is easy. When I bought my first inflatable and brought it home in boxes I laid it out in the living room. My 5 year old son figured out how to attach the pump and had the boat inflated in a matter of minutes. Getting it to basic shape goes really fast, once you start getting a little bit of pressure it slows down some.

Fitting the floorboards and such is what took forever on my first two inflatables.

Rod
 
"Fitting the floorboards and such is what took forever on my first two inflatables."

+1, inflating is the easy part.
 
Back
Top