Installing Snaps

[WALSHIE]

Hi, I received a replacement top from Gioa Sails. I borrowed a snap tool and am ready to install the snaps.

Any words of wisdom? Start from the center, etc?

Any advice would be appreciated!

 

[Mike McManus]

Get a helper And install all the windows and curtians before you start snapping.
Start in the center and mAke sure your corners all line up right with no wrinkles

 

[walterv]

Pull tight,real tight before you cut the snap in. This is a two person job IMHO.

 

[WALSHIE]

Well, I installed the bimini top and all of the old cutains, they all lined up. Only the front panels are bad enough that I have to use new. I could have saved money replacing the top and the fronts but I'm glad I ordered everything.

With the top on, old sides and rears installed AND SNAPPED, I will start at the front center using the old as a guide while stretching the new. Once done, I will have a complete top and from there, I can do one panel at a time.

I'm shocked at how well the new lines up with the old! It makes this install just about "stupid proof"