Installing Window Track?

Joeshoes

Member
exMember
Joined
Jan 1, 2000
RO Number
1967
Messages
601
There has to be a simple answer but I do not have it. I am installing some plastic locker covers in the main cabin that slide back and forth on some track that I bought locally.

The track gets screwed down onto the deck in the opening. How do you screw down the track without obstructing the movement of the sliding doors?
 
Without seeing the track, I would "ASSUME" that you countersink the screws.
Al
 
I have thought of doing something like this myself. Actually want to replace some track. I saw some at West marine but thought it was too expensive 23 bucks for 8 feet. Where did you find yours??? I did notice that the old track was stapled down but countersinking makes more sense.
 
Depending on the track, there sometimes is an aluminum track that is screwed down and a polymer insert that fits in the track over the screws. The insert provides a low friction surface for the panels/doors.
 
Boat the track at WM locally and spontaneously. It is made out of plastic and very thin. So a coutersink will not work since it would be impossible to drill that finely.

The way I have the screws now they inhibit the run of the plastic doors at the bottom.

Any ideas?
 
Back
Top