I was wondering how feasable it would be for me to install a Raymarine 120 with radar, myself. I am skilled mechanically, but not really electrically.
These units seem to be plug and play with the exception of the power wiring. There is an exisitng chartplotter on the boat I am buying, but no radar. I would need to buy a new chart disc for the existing 8 year old Northstar 962 unit, so I figured now is a good time to upgrade the old and get an all in one. This would mean that I could reconfigure the hole in the helm, instead of making another large hole for a stand alone radar.
I already own a Navionics Gold chart that will work in a C120.
The boat was advertised as "radar ready" which hopefully means that there is a pull wire to get the wires up to the hard top. There is a bump up on the HT to accept a radar.
I have noticed on sisterships that the radar is mounted directly to the hardtop bump up area with no shims, so hopefully getting the correct angle should not be a problem.
It seems like a no brainer, install head unit, replace antenea and wiring with new, plug in. Mount radome , snake wiring, plug in. Attach old power wiring to new unit (hopefully)
What am I missing.
Dan
These units seem to be plug and play with the exception of the power wiring. There is an exisitng chartplotter on the boat I am buying, but no radar. I would need to buy a new chart disc for the existing 8 year old Northstar 962 unit, so I figured now is a good time to upgrade the old and get an all in one. This would mean that I could reconfigure the hole in the helm, instead of making another large hole for a stand alone radar.
I already own a Navionics Gold chart that will work in a C120.
The boat was advertised as "radar ready" which hopefully means that there is a pull wire to get the wires up to the hard top. There is a bump up on the HT to accept a radar.
I have noticed on sisterships that the radar is mounted directly to the hardtop bump up area with no shims, so hopefully getting the correct angle should not be a problem.
It seems like a no brainer, install head unit, replace antenea and wiring with new, plug in. Mount radome , snake wiring, plug in. Attach old power wiring to new unit (hopefully)
What am I missing.
Dan