I've seen several posts here about firearms for boating but never a topic on boating knives. Good knives are boating essentials and I'm sure there are a lot of favorites here. If you can recommend a good fillet knife for sturgeon let me know.
Here are my two favorites for the boat and another is included for historical interest.
The knife I use on the boat most of the time is the USAF Pilots Survival Knife (Ontario 9-87). It has the leather scabbard. Good for everything from cleaning fish to cutting loose line from a fouled prop to thin slicing hard salami. The name tells you what this knife is really about. It was designed to cut through nylon straps and lines and saw through aircraft sheet metal. Other features include a second knife edge on the top. This second edge is optional but the blade has been forged so that it can be easily ground and honed. It's a combat/utility knife with blood channels and some holes on the thumb guard for booby-trapping. A sharpening stone is included. The blade is five inches and parkerized. The grip is leather washer and the pommel doubles as a hammer. My knife has darkened with 20 years of use and occasional treatments with neatsfoot oil. I added the nylon strap to two existing holes: this prevents the knife from coming loose while hiking through brush. This one always goes with me in the car or the boat. These knives are still available new on the surplus market for $10-20.
The other knife I use on the boat a lot is the Camillus Electrician's Knife. I've had this one for thirty years and it resides in the tool box. This pocket knife has seen a lot of use and abuse. It features a hard rubber handle (not Bakelite). The screwdriver blade locks into place and cuts wire easily.
Just for historical interest I've included the USN MK-1 (PAL 20-RH-35). I don't use this knife anymore: it was issued to my Dad during WW2. This is a nice knife. Lots of MK-1s were made during the war but due to material shortages the PAL contract produced the only knives that came close to USN specifications. The 5.125 inch blade is parkerized and the grip is leather washer. The colored washers were specified in the USN specs. The scabbard is plastic, steel and hemp webbing. The MK-1 is a granddaddy of the USAF Pilots Survival Knife and the current USN MK3.
Here are my two favorites for the boat and another is included for historical interest.
The knife I use on the boat most of the time is the USAF Pilots Survival Knife (Ontario 9-87). It has the leather scabbard. Good for everything from cleaning fish to cutting loose line from a fouled prop to thin slicing hard salami. The name tells you what this knife is really about. It was designed to cut through nylon straps and lines and saw through aircraft sheet metal. Other features include a second knife edge on the top. This second edge is optional but the blade has been forged so that it can be easily ground and honed. It's a combat/utility knife with blood channels and some holes on the thumb guard for booby-trapping. A sharpening stone is included. The blade is five inches and parkerized. The grip is leather washer and the pommel doubles as a hammer. My knife has darkened with 20 years of use and occasional treatments with neatsfoot oil. I added the nylon strap to two existing holes: this prevents the knife from coming loose while hiking through brush. This one always goes with me in the car or the boat. These knives are still available new on the surplus market for $10-20.
The other knife I use on the boat a lot is the Camillus Electrician's Knife. I've had this one for thirty years and it resides in the tool box. This pocket knife has seen a lot of use and abuse. It features a hard rubber handle (not Bakelite). The screwdriver blade locks into place and cuts wire easily.
Just for historical interest I've included the USN MK-1 (PAL 20-RH-35). I don't use this knife anymore: it was issued to my Dad during WW2. This is a nice knife. Lots of MK-1s were made during the war but due to material shortages the PAL contract produced the only knives that came close to USN specifications. The 5.125 inch blade is parkerized and the grip is leather washer. The colored washers were specified in the USN specs. The scabbard is plastic, steel and hemp webbing. The MK-1 is a granddaddy of the USAF Pilots Survival Knife and the current USN MK3.