Leak

BillyBo

Member
Joined
Mar 28, 2008
RO Number
29723
Messages
81
I had a leak from one of my bow hatches, my head material is vinyl with a faom backing, I re-calked and replaced the hatch, however, the foam backing is still wet, I have left the trim off in an effort to help it dry.
My question is, does anyone know of a way to dry this out quicker, as I said its vinyl with foam so I can't use a hair dryer or heater in behind it.

Thanks in advance

Bill
 
When I had a leak in my boat was able to leave a dehumidifier running which did the job quite well. If you are slipped and have access to 110v may want to try this. Can run hose from dehumidifier directly to the bilge. Just a thought.
 
run the air conditioning, or absent that put a dehumidifier on board and run that.
 
Back
Top