I currently have a 22-foot Bayliner Aft, and with the addition of the little one (2 years old now) want to move up in size. I have had my eye on a mid 70's Marinette 32 Express Flybridge for about a year now. The admiral wasn't keen on it last year, but we both played hooky on Tuesday, and I took her to see it. She now is in love with it, and wants it in the water this year. I have the opportunity to purchase this boat for $2k as it sits, or with freshly rebuilt starters, and (replacement) rudders and shafts, and props for $3.5k. Inboards are a WHOLE new ballgame to me. Can diagnose and fix about anthing on a Volvo I/O though.
The better half and I are in love with the boat, and considering that we are not rich, this presents a great opportunity, but also a LOT of questions…
1. What size SHOULD the rudders be?
2. What material for running gear, or does it matter. Bronze/SS?NiBrAl
3. What size/blade/pitch props should it have (twin 225's). Not sure on trans ratio yet
4. What size should rudder shafts be
5. What model transmissions does it have?
6. What is the best way to check them out of the water
7. What model were the original carbs
8. What is the dry weight
9. How do I test the operation of the “stray current" (Capac) meter when not in water
10. Can the transmissions in it be freewheeled
11. What size are the fuel tanks
12. What is the minimum plane speed/gph
13. What is maximum speed/gph
14. How do I determine if I can slap an ablative on the bottom, or if a full redo with barrier coat is needed. Can bottom be touched up
15. What should I expect to pay some one to redo the bottom (parts/labor)
16. Can the top sides be done with Krylon
17. Is there an easy way to check the run out on the prop shafts
There will NOT be a survey. It is an ALL aluminum boat. only wood is cosmetic. I will checking the hull for pitting, checking engines (will they turn, what is compression), and do a close all day look over on Saturday.
I know alot of these questions are tall order here, being this is not a Marinette site, but I have never felt a lack of response on any of the posts I have ever made, so I figured I would throw it out there. Thanks to everyone for any feedback
The better half and I are in love with the boat, and considering that we are not rich, this presents a great opportunity, but also a LOT of questions…
1. What size SHOULD the rudders be?
2. What material for running gear, or does it matter. Bronze/SS?NiBrAl
3. What size/blade/pitch props should it have (twin 225's). Not sure on trans ratio yet
4. What size should rudder shafts be
5. What model transmissions does it have?
6. What is the best way to check them out of the water
7. What model were the original carbs
8. What is the dry weight
9. How do I test the operation of the “stray current" (Capac) meter when not in water
10. Can the transmissions in it be freewheeled
11. What size are the fuel tanks
12. What is the minimum plane speed/gph
13. What is maximum speed/gph
14. How do I determine if I can slap an ablative on the bottom, or if a full redo with barrier coat is needed. Can bottom be touched up
15. What should I expect to pay some one to redo the bottom (parts/labor)
16. Can the top sides be done with Krylon
17. Is there an easy way to check the run out on the prop shafts
There will NOT be a survey. It is an ALL aluminum boat. only wood is cosmetic. I will checking the hull for pitting, checking engines (will they turn, what is compression), and do a close all day look over on Saturday.
I know alot of these questions are tall order here, being this is not a Marinette site, but I have never felt a lack of response on any of the posts I have ever made, so I figured I would throw it out there. Thanks to everyone for any feedback