Navigation Lights

seeray96

Member
exMember
Joined
Jan 21, 2005
RO Number
16115
Messages
113
I'm looking for a replacement for one of the nav lights on my 1995 SeeRay 500DA. I've looked through many catalogs, and cannot find anything that matches. I'd like to include a photo of the existing light in my BoaterEd request for help, but need advice re: getting the pic on my message.

Any suggestions?
 
Can you take a photo of it?
Does it have a manufacturer name on it somewhere?
 
I did take a photo of it, but can't seem to get it on my message. Called Sea Ray and they said is mfd by Perko. There is no mfr. name on the light, and it does not look like anything in the Perko catalog.
 
Send me the picture via Email and I'll gladly post it here for you if you like.

capt (dot) bill11 at verizon (dot) net
 
Ray's Nav. light:

runninglight.jpg
 
You call that a nav light? Looks like a knob to me. I'd upsize for enhanced visibility. Now's your chance...
 
It is amazing how often manufactures cheap out on the size of their nav. lights.
 
Is it just a red or green light or is it a combo. red and green light?
It is hard to tell from the photo.
 
Are you having a problem finding a replacement bulb or is the
bulb socket bad? Or do you just want a new light?????
 
I couldn't see anything identical in Perko, Hella ,AquaSignal or even Sea Dog catalogs, but perhaps Perko made that model especially for SeaRay just as Teleflex often made some gauge models only for specific boat or engine mfgrs. Did you open it up to see if there is ID inside? Is that a pic of a red port nav light on a deck/gunwale or hardtop? If it's not LED and identical replacement can't be found , why not replace both sides with an LED model?
 
About 8 yrs ago, I had to replace my starboard nav light. I found corrosion had done it in. Figuring that the port light would need a similar replacement in the near future, I also purchased the matching port light. I'm still waiting for the port side to stop working! [:-boggled]
 
Sorry I wasn't more specific, guys. The light is on the port side, and is approx 2-1/4" diameter. The top is metal, and the housing is plastic. The DC line to the bulb socket is 24v. It looks like I won't be able to find a match, so I probably will have to replace both. The PERKO #0253 might be a candidate, although I'd like to use an LED light if I could.
 
Who needs lights on a 50 foot searay? You'll see the bow wake a lot further out and you'll here the sound of engines succking large quanities of fuel for miles in every direction...
 
Personally, I would find myself some new nav lights that look good, are larger and brighter and replace all of them, especially if you do a lot of running at night like I do. When I bought my boat the first thing I did was exactly that. But, that's just me. :)

quote:

Originally posted by seeray96




 
To Shadowcruzr -
You're right, but we have lots of Coasties here in the Buffalo area, with Canada about a 10 sec. run across the Niagara River. They can be sticklers about following regs!
 
96, I hear you loud and clear, I am one of them....
I would look for a set of LED lights that match your styling and hook them up with heat shrink connectors. THe brighter is my moto.
Better to be seen than felt...the boat that is...
 
Shadow -
Congrats to all you guys - you deserve it! I know you draw some comments due to our border situation, but the guys I know around here appreciate the dedication.
As far as the nav lights are concerned, I'll find some good LED's. No rush, since 1) I have a temporary fix that's effective, and 2) I don't like running at night anyway!
 
96,
Thank you. It truly was my pleasure.

I like running at night but very slowly... I forgot to mention that the one problem with my brighter the better philosophy is when you get stuck in fog your bright lights can almost be a hazard to yourself...
 
24V? It that the connector's max capacity or is the system 24V.
 
Back
Top