New Rinker

Robski97

Active member
Member
Joined
Jan 26, 2002
RO Number
7334
Messages
5,991
Alot people I saw were posting about how GREAT rinker is and how much value they pack into a boat. Theres an ad in this months Boating magazine with a rinker in the add. All the electrical and water connections are on the port side aft but ON THE OUTSIDE below the rub rail.... NOw thats a WTF,,,,,

Rob
 
The Rinkers I've been on [all a couple years old or more] had the electrical panel down below and near the overhead----out of little hand reach. Don't know why the change.........I'll ask my friend who sells them for feedback.
 
We have a Rinker 310 across from my slip with the city water connection on port side about 8 inches above the waterline. Its right in line to catch on the dock and break off. What are these guys that design these boats thinking?
 
I guess none of the designers at Rinker every rafted up at Champlins on Block Island........
 
Rinker used to be a family owned company--it was sold a few years ago to an investment group....
 
If you guys want to see a abortion of a hinged radar arch,check out the 2008 rinker 350. looks like a after thought that was done by a do-it-yourselfer. I guess it is said many times you get what you pay for. Joe
 
Fortunately I have the 2000 50th anniversary model 330 Fiesta Vee. The electrical is protected, above the walkway and behind a railing. The water is on the inside at the transom. It rides dry, but I am on a lake not the coast. Rinker, like other manufacturers need to understand that all change is not progress.
 
I am looking at that Rinker ad right now and the power cord connections are on the port side, but definitely not below the rub rail. As a matter of fact, the connections are significantly above the rub rail. Also, Rinker has something called "its shore choice" on all their cruisers which means there are connections on the side and at the transom so you can pick either location to run your power cord to. There is no water connection on the port side. It looks like either the fill for the water tank or the pump out for the holding tank. I have no specific loyalty to Rinker, but the information previously stated is inaccurate regarding the shore power connections.
 
I believe the remark was to indicate that...you can see these connections...most other boats hide them in a cabinet or inside the cockpit so they aren't cluttering up the exterior look of your boat....you've got to admit, that looks aweful with those connections right there on the side of the boat!
 
Thank you Ram.... That was the point ... I tossed the magazine and was going by memory . So Was I wrong ?? Do u not have to lean over the side of the boat to make these connections ?

Rob
 
They have conections on either side of the boat. You can plug into which ever side want to
 
That is why there are so many different choices, So we can buy the brand that we like best. Just like I would never buy a SR because the cockpit seating is so low to the deck. Do they think everyone is 4ft tall? Just Sayin'.
 
That's one thing that really bugs me about many boaters. They strictly recommend only what they know, and strongly discourage what they don't know (that gets a big WTF??). If Rinker was such a bad brand, would they still be around after all these years? How about Laron? Another brand that usually gets knocked for one reason or another. Those companies must be doing something right. Customers have different agendas... some care more about interiors (leathers, fit and finish, layout), some care more about drivetrain (engine, outdrive, etc). It's their preference, let them choose what's important to them. Some people should spend less time knockin' and more time boating.

Doug
 
I was recently at the Rinker dealer and he had a boat that he was installing a new motor and outdrive so I could see the thickness of the transom laminate. It was so thick and solid I couldn't believe it and it was one of the Captiva models which are smaller than the cruisers. No coring anywhere on the Rinker hulls. Now that impressed me. Maybe not all the bells and whistles like some other brands, but the hull is well built. I also liked that there was no balsa core in the hull, which can be a problem if not laminated correctly....uh, like some other brand that had major problems in that area....now what was the name of that company that screwed up many a boat with balsa core? I can't remember, but I think it has a S-R in the name :). Bottom line, every company has strong and weak points and you purchase what works you and what you can afford.
 
Back
Top