Poly Welding

Flatsflyer

Member
Joined
Feb 23, 2005
RO Number
16388
Messages
204
I have four (4) 75 gallon water tanks on my Trawler. One developed a leak on a recent trip to Key West. I've pulled the generator and water heater so that I could get the tank out. What I found was a "split" seam on one side of the tank.Has anyone had any luck with poly welding. The four tanks follow the shape of the hull so finding a replacement tank has been fruitless. I drop the tank off at a company in Ormond Beach, Florida that does Polymer Fabrications. They are in the process of repairing the tank. My question is has anyone else use anyone to do this type of work? Has it been successful?

There are plenty of outfits on the WEB selling poly welding equipment, but not many companies performing the actual work. I was wondering why normal welders don't provide this service?

Hopefully I'll get my tank back on Wednesday and will reinstall by the weekend. I also replaced the heating element in the hot water tank, there was no cleanout on the water tank (Raritan) so I decided to pull the element, glad I did because the 'crud" in the bottom and the element itself was quite in poor condition.
 
Yes, the repairs are quite successful. I am a Mil certified Metal welder as well as a Plastic welder. I have merged the two fields because of boating and personal needs. That being said, the skill set is very different. I have thermally welded PVC, HDPE, LDPE and Polypropylene tanks, structures, seats, railings, bulhead fittings etc...
Penetration is terrible on plastics so the joint prep work is critical to success. Frequently they will route out the crack, fill to flush with new material and then apply a cover patch to increase the surface area of the repair.
 
I was wondering exactly what the correct procedure was for 'welding' plastic. I got one of those hot air welders from harbor freight but brought it back because the hot air stream was too wide do any good.

My trim tabs power/pump(boat leveler) housing is a molded plastic but only taped together. It felt like HDPE so I cut some plastic milk jugs in 1/2" strips and lit it and let the burning plastic drip on the seam.. Eventully, I got it figured how long to let the burning plastic melt the case so that it did weld the two halves together. Trouble is it looked really messy but I didn't bother to clean the weld cuz the pump was in the bilge area.
 
With minimal expertize I have successfully welded both polyethylene and polyvinyl. I was surprized how well it worked and how strong the resulting weld was.

The repair should be good as new, if not better.
 
Most fire trucks and brush trucks use poly tanks. Ours have been welded without problems.
 
When you say 'welding' are you talking about heating both sides of the split until the Poly flows into, or melds to each other?
If thats what we are talking about, I do that here in my barn on small stuff.
I've found that some materials do not weld together at all.
Those Blue Barrels that Chemicals are shipped in do not weld very well.
I've been using a 100 Watt Soldering gun, or an old fashioned bronze soldering iron heated by a propane torch.
 
Thud,
Those blue barrels, I think, are made of the stuff I was 'welding'. I lit strips on fire and dripped the melting, burning plastic in the seam. It would melt the seam edges so you had to put out the fire as you followed the seam.

Yeah, I know...more things for you to do now.[:P]
 
The HF plastic welder works very well, but like most things you have to learn how to use it. Technique is everything and you must adjust the airflow and distance of the tool from the work carefully. The only problem I have had with them is that the fillaments can be delicate and prone to breaking. Let the tool cool slowing with the air still flowing slowly and the fillament won't break so easily.

bp
 
quote:

Originally posted by jtybt15

Thud,
Those blue barrels, I think, are made of the stuff I was 'welding'. I lit strips on fire and dripped the melting, burning plastic in the seam. It would melt the seam edges so you had to put out the fire as you followed the seam.

Yeah, I know...more things for you to do now.[:P]





Marvelous Charlie. And you are correct. I'm going down to the barn and try that right this morning.
I never woulda thunk of that one.

Ahem....I does make one wonder what the hell you've been up to, that you'd know things like that?
 
HA! Pretty simple...I'm too cheap to buy stuff that can be fixed.:D
 
For those of us who dont have the right welders handy.

We'd be trying to glue that Poly- (theresabunchofem) tanks n' other stuff.
The reason they use Poly-ethelyene is because nothing sticks to it. It does not mix with anything else.

First go here: http://www.finishing.com/61/07.shtml
After reading that, you’ll know what you’re up against.

I got this from one of the Blue Barrel mfg's:

“Dick,
Look specifically for glue for polyethylene or polyolefin’s. Polyester is
different--the glue sort of melts it chemically and the polyethylene may just
giggle and laugh at it”

So its probably possible to fix that split with the same kind of poly and this Poly glue. Sorta like fixin a split in your RIB.
 
Back
Top