justgotaboat
Member
- Joined
- Jun 18, 2009
- RO Number
- 31427
- Messages
- 159
I went to launch my sea ray 245 weekender the other day and I had totally dead batteries. It was my own fault (I think). I left the battery switch on for over three weeks, and I figure there is a slow draw from a few things even though everything was off. Once I got a jump the boat started up fine, and ran ok at a slow speed until I got out of the "no wake zone". Once there I tried give it some gas, but even with full throttle the boat could not come up onto plane. It could barely reach 3000 rpms and was way underpowered. The boat had 4 people, 4 peoples worth of camping gear for a few days, and a full tank of gas. In my opinion, not overloaded at all. It should have easily handled the load in it. But she definately could not handle it. I was under the impression that once an engine was running that it drew all its power needed from the alternator. Does having a bad charge on the batteries really affect the performance of the engine that badly?
Fearing the worst I took the boat to the local marina a few days later (the first available they had to look at it). The performance of the boat had gotten better over the course of the few days, but still seemed sluggish. Its got a 5.0L and a Bravo III. The mechanic took it for a ride and agreed that something was not 100%. He checked the timing, did a computer diognostic, made sure it had the right sized props, but came up with nothing. The boat can't seem to break 4200 RPMs completely empty and with only 2 people in it and seems sluggish coming up onto plane. What kind of RPM range should I be expecting out of this boat? The tach goes to 6000, so I figured somehwere just shy of 5000 would be realistic. Am I expecting too much out of my engine and outdrive? I was under the impression that the Bravo III was supposed to be more of a performance drive and therefore make the boat quicker. Am I out of line? Any help, thoughts, ideas, suggestions etc would be great. Thanks.
Remember, I did just get this boat, I am used to a mid 80's sea ray 225 with a 5.0L and an alpha one. So I contiually compare it to that.
Fearing the worst I took the boat to the local marina a few days later (the first available they had to look at it). The performance of the boat had gotten better over the course of the few days, but still seemed sluggish. Its got a 5.0L and a Bravo III. The mechanic took it for a ride and agreed that something was not 100%. He checked the timing, did a computer diognostic, made sure it had the right sized props, but came up with nothing. The boat can't seem to break 4200 RPMs completely empty and with only 2 people in it and seems sluggish coming up onto plane. What kind of RPM range should I be expecting out of this boat? The tach goes to 6000, so I figured somehwere just shy of 5000 would be realistic. Am I expecting too much out of my engine and outdrive? I was under the impression that the Bravo III was supposed to be more of a performance drive and therefore make the boat quicker. Am I out of line? Any help, thoughts, ideas, suggestions etc would be great. Thanks.
Remember, I did just get this boat, I am used to a mid 80's sea ray 225 with a 5.0L and an alpha one. So I contiually compare it to that.