Prop Pitch- Explain?

It's called "slip". IN THEORY the prop would move 16", but water is a fluid, not solid. The water is kicked astern while the boat moves forward (Newton's third law). So the prop might move the water 6" back per revolution and the boat 10" forward. The 6" slip (in this case 37% if my math is right) is essentially wasted.

Think of a boat as a rocket. In order to make it move you have to kick a certain amount of water in the opposite direction. The heavier the boat, the more water you have to move, and the higher the slip ratio is going to be (other things being the same).

You might reduce the slip with bigger props, different pitches, and different transmission ratios, but everything is a compromise...
 
Greg, think of props as a screw. Two screws with the same thread pattern (kind of like pitch and diameter) are going to advance the same distance per revolution through whatever material you are screwing into no matter how different the material is or how big the screw driver is or how much force you are applying.
 
Joe- I'll be glad to forward the same pics and info I sent to David but that seems to require you send me an e-mail through my profile address 1st. I don't think I can attach pics sending them through your B/Ed e-mail link so I just transfer the address you send to a new message and attach.
 
Back
Top