Proper Rope sizes

elgatto65

Member
Joined
Feb 5, 2008
RO Number
29359
Messages
35
Moving up to a 33' boatw/ 12'beam.Need to know what length& how many ropes for tieing up to a floating dockw/ 2 poles in the front. Also will be tieing up to a stationary dockrb2@gr5t stern w/ 2 poles out front on the weekends at state park.I am trying to avoid the usual too long or too short purchases.I am figuring 6 for each?
 
I like to have four lines at 1/2 the length of the boat and 2 at the boats length. There is some need as well to pay attention to the height of the tide. If you have an extreme tide like the Bay of Fundy, Ignore what I said! Although I see you are talking floating docks so go back to my suggestions!
 
I think without knowing where the poles are, where the cleats on the dock are, where your cleats are on the boat, probably no one can tell you exactly what you need. There are certainly plenty of mooring illustrations to be found in books as suggested above, or by Googling, and you can find one that matches yours.

I would suggest 5/8" lines at minimum. I carry 5/8 double braid with me for probably the same 'state park' scenarios you are thinking of. For my 32 I am well served with 4 25s and 2 35s. But I also have plenty of old mismatched lines stowed for extras. You can't have too many lines since conditions will arise where you want to double up, or you end up with an odd slip with pole in an unusual spot, have to reach a distant cleat, etc.

At home I use a mix of 5/8 and 3/4 three strand, most of which I've spliced up myself after cutting up some old anchor lines I came by at garage sales. There again, the more the merrier, there no such thing as too many lines.

Maybe if you included a diagram of some sort of the home slip arrangement you'd get more suggestions. I'm not sure I understand the floating dock with two poles at the bow thing.

Goes without saying, a great place to buy rope is Boatfix. I shopped all over last year to buy my double braid lines, and they were unbeatable.
 
Sorry my bad.I know they are lines and have no idea why I called them ropes. I think my question was answered w/4 half the length &2 the full length of boat.
 
The biggest concern would be the size of the cleats on the boat. My 330 will only take 1/2" comfortably and 1/2" works very well for me and my style and boating places. Most other boaters in my area with roughly the same size boats use 1/2" as well for the same reason. If your cleats can take 5/8" then by all means go for it. However, realize in a raft up. your neighbor may not be able to accommodate your lines. Just something to consider.

I use triple strand for the stretch factor and the price. If I need to worry about weather, I just double up the lines.

Your size selection mimics mine. It serves me well.

HTH
 
Avoid braided line if you tie to them to poles. They will snag and get ugly fast. 3 strand is what I would get for the poles and I like braid for dock to boat connections.

Look at your cleats, if they are on the small size, you won't want to crowd them with a line that is unnecessarily too big.

33' boat, 1/2 line should suffice. Again, if you have smaller cleats then you need to make room for 2 lines on the cleat.

If you tie that boat length line to a bow cleat and the line accidentally goes in the water, there is the possibility that the line can make it to the stern of the boat and get tangled in the props. Just remember that when putting your lines on. The boat length lines are for the spring lines.
 
Isn't a rope a rope unless it's attatched to a vessel, then it's a line?
 
If it has a distinct purpose - It's a line. In some cases, it gets even more specific, such as fender whips or anchor rodes, etc. If it's just there for whatever purpose it may eventually be to use for, it's a rope.

...until you put it to work. Then it becomes some sort of line.

The one thing that I haven't seen mentioned here is the weight of the vessel. That matters! The requirements of my 38' go-fast (12,000 lbs) are quite different from those of a steel-hulled 38' tugboat (50,000+ lbs?).
 
I thought line was an adjective and rope is a noun. Some would refer to it as a line, but that is really an abbreviation for the type of line being referred to.

to answer the original question about lenght. i carry two line lengths and have found them to be adequate, 50' and 25' i also have a hand full of 15'. i use the 25' for almost all docking, occasionally the 15' and 50'. for tieing up before a big storm i double up and have a couple larger 3/4" 75' lines. really the longer heavier lines aren't necc as you already should have a long anchor line that can be used for this. i use 5/8" lines. they are well suited to the size cleats on my boat. you probably will find that either 1/2" or 5/8" will fit your cleats well. 3/8" for general use is probably large enough but may be small on your cleats.
 
In nautical terms, a rope is what comes neatly rolled up on a spool. But when the rope is cut to a specific length and assigned a task, it becomes a line. Exceptions to this would be the line connected to the ships' bell...that is a bell rope, or a line on a bucket...that is a bucket rope. Now, if you don't care about the nuances...then forget the above and sound foolish when you're around a vessel. ;)
 
The suggestion of two at half the boat's length and two equal to it's length is good, but isn't quite what I've got. I've got five main lines I use regularly. Two 25' for the stern, two 35' for the bow and one more 35' for a spring line. I like to cross the stern lines as this better deals with tidal changes. The longer bow lines have proven necessary when I get stuck in an overly large slip. Those bow poles end up being "just far enough" away that 25' lines aren't always long enough. The long spring line comes in handy in several situations. I also have a pair of 12' on hand for raft ups and the like. Bear in mind that you need to have some extra length on the lines to accommodate them being properly tied to the pilings.

I use 5/8" lines. As the boat size and weight goes up you need to use lines designed to handle it. The boat came with 1/2" lines (a couple 3-strand and a few braided) but they really didn't have the 'heft' I wanted. The heavier line is a bit easier to toss over a piling or to someone on the dock.

3-strand lines can be rough on wet hands. My wife greatly prefers the braided type. It is true that splinters from a piling can get snagged on them and make them look messy. But if you put a bit of care into how the lines are handled it's not much of a problem. As in, don't go pulling the line the whole way around a wood piling. That and 3-strand lines tend not to stow as neatly as the braided ones. But it's more a matter of preference than anything else.

I also have two sets of lines. One that comes with us and the other than stays attached to the pilings in our slip at the marina. It's MUCH easier to coordinate docking with guests when we're not also fumbling with breaking out the lines. Just use a pole and hang 'em from the hook on the piling. And if/when you see a neighbor's line that dropped into the water, do them a favor and pick it up. It'll keep the crud off the line and it will also prevent the loose end of it from getting sucked up into your propeller when docking.
 
you guys are slacking... nobody suggested a boating course yet, not even Liz... we only got Chapman this time around...

in most situations two bow lines, two stern lines and two spring lines work pretty good. Bow and stern dont' have to be very long, a little over the beam of the slip will work fine and allow you to cross teh stern lines to keep the boat centered. Crossed stern lines also do a good job keeping the boat close to the dock, eliminating the need to forward springs.

at your home dock, you can probalby use a 25' line as spring, usually from the forward piling to your midship cleat. For spring, i prefer using the eye on the boat this way you know that the boat will not back into the dock and since they're the first line on, they are slack when you grab them backing in. for bow and stern, I prefer using the bitter end on the boat, marked with nylon zipties so that i can work the line on the cleat to pull the boat when it's windy.

for transient slips, it's good to have longer lines since you never know what you will need, so the advice to use spring line as long as the boat is good. when you tie along side, if they turn out to be too long the other hand can be used as a breast or aft spring.

1/2" should be good...
 
What makes crossing stern lines a good idea? Is it the extra length providing stretch?
 
visualize (or draw) the angle to the stern. when you cross the stern lines, they will be at an angle which will minimize lateral movement. you also get a little more stretch/shock absorbing and tide adjustment
 
Back
Top