Question for Furuno Chartplotter Users

Sandy K.

Member
exMember
Joined
Mar 15, 2001
RO Number
3775
Messages
406
My Sea Ray had a RayMarine system, so I've been spending some time learning and getting used to the Furuno electronics on the Egg Harbor.

One of the things I've noticed is that when I highlight the cursor over a nav aid, I don't get a box with the name of the nav aid like I used to get on the RayMarine unit. Both units use the C-Map NT+ cards.

So, is it likely a setting that needs to be changed (the Furuno equip was set-up by the previous owners) or is it just that the Furuno chartplotter does not offer the option?

Also, someone mentioned in another thread that you should stay away from the Furuno dome radar, as opposed to the open array. Why? (The Egg came with the 2' radar dome and it seems to work fine....)

TIA,
 
Find the menu on your Furuno that has chart set up. Look for something mentioning Data Boxes. Turn that on.
 
I have a Furuno 1720 NavNet Vx2 with C-Map NT+ and I get pop-ups with I move the cursor over an object. The pop-ups are not Databoxes. I'll look at my set-up next time I'm at the boat.

Mark
 
It will be in the menu in detail or POI. The information is in the C map chip--assuming that you have the more recent chips. There is no reason to avoid dome radar. The larger antennas, which are open array will show better descrimination--that is if two targets are close together, the wider antenna with a narrower beam will show two targets, vs a smaller dome which might only show one target. Also birds are difficult to see with the domes. But for navigation, the 2KW dome Furuno radars are fine.
 
Back
Top