Raymarine E-Series

seeray96

Member
exMember
Joined
Jan 21, 2005
RO Number
16115
Messages
113
Been waiting for a new software release for the E-Series (other than the recent WAAS update). We're told it'll add features that the C-Series now has. It's obvious the C-Series software development has been given priority, despite the $1,000+ difference in cost for the E multifunction displays.

Silly me, I would have expected the Brits would not relegate the new E stuff to second class status, but what do I know? An update was scheduled for early fall, and now we're told it'll be 4th qtr '07 or 1st qtr '08.

Any scuttlebut?
 
Just curious, what features are you missing that you are so anxious for?
 
Whats the update for the E supposed to do ?? Id settle for a more stable screen when turning.... keeping the curser on the vessel when u find ship would be nice....

and thats only the start

Rob
 
Ok my 2 cents... The radio control wont work as there not wired into the network. The weather we already had. The auto pilot control from the screens I saw looks the same as regular routew screens but auto enables the auto pilot... OK NO THANK YOU ....

I didnt see anything stellar .... looks like we have most of it ... I stopped reading after the auto pilot.

Oh the tides... that would be an improment... the current tide program is a joke.

Rob
 
Rob -

Thanks for the input. I guess it's not such a big deal. One thing, however, I installed the Bennett trimtab sensors, but Raymarine advises that the current E series software (with NMEA 2000) won't read the signal. They advised that the update would take care of this.

Not sure how this will be done.

Ray
 
I think the new E series software will add support for the new digital radars. That may have been slowing down the release.
 
What are the digital radars? Is that an upgrade to the existing radar? Does it require a new radome?
 
YEs new radar array is required for HD RADAR... I havent seen any snap shots of the improved images we should get...

The dsc feature also works like crap. To test need two people with VHF radios connected to there chart plotters. Go into the menu and perfrom a location request from ur buddy. The raymarine unit ( radio and chart plotter ) will only plot a portion of ur lat and long location while any body elses equipment will plot the lat and long including the minutes which raymarine does not ... in my eyes making the whole DSC thing mute... But the defenders will say well atleast u know aproximatley where they are... My opinion is when u have a may day ur not sitting there going tru the menus after u hit the DSC button... Ur going to 16 and calling MAY DAY becuse u want to know someone heard u... and also u want them to have ur EXACT postion not the over there thing the raymarine junk spits out... But try the position request.. almost half of the radios i have seen arent even connected properly

Rob
 
I'm no Raymarine fan at all. I put an E120 on my boat this summer and then pulled it off and sold it at a huge loss just to get rid of it. I think Raymarine is a great marketing company.

The DSC position function was a problem with older Standard Horizon plotters also, but they fixed the problem. I think most manufacturers have fixed the problem also. RM will likely fix this one since it really isn't a big deal. I agree that the way it is now isn't very useful. Not just the emergency, but the Position Request function isn't useful. I've had a few friends try to position request my boat (I always had a Navnet2 unit, even with the RM). If they didn't have the minutes, then they wouldn't have found the right bay.

As to RM not keeping the E series as up to date as the C series, that's just wrong. It is also very telling about the E series. To me it says the E series was a failure.

The new HD radar has been shown on Panbo.com. It's really good, really really good. My complaint is the cost. 4KW is $7k, 12KW is $8k. The new Furuno digital radars should be just as good (but I haven't seen them to actually verify that) and they are $3700 for a 6kw array, even the 12kw is much less than the RM.

I didn't mean this to become a Furuno vs. Raymarine post, but if anyone is interested, I will post some thoughts comparing them.
 
This sounds a lot like Microsoft and Windows. Rush to market with something that looks pretty and can almost pass as "done". Then keep rolling out updates as you finish it as opposed to updates to make it better.
 
The Microsoft analogy seems appropriate, but I really hope I'm wrong.

I would be interested in praetorian's comparison.
 
praetorian ,
U said what u fell no problem... I just had a long email with a buddy whos attedning a raymarine class... I told him what to ask... they said the E series update to fix DSC and other issues will be out early to mid 08.....

Funny when i first called raymarine about the position request n/w they told me thats all it does... ( general area ) I was like ur full of it... glad to see 2 years later its being addressed... My buddy has old garmin GPS and a icom DSC radio.... that combo works 100% better then my raymarine combo ( radio/ gps ) and yes my raymarine radio is a piece of junk too....

Rob
 
Can anyone elaborate on what the specific areas of improvement you'd get with digital radar? I think radar is very important. I've gotten stuck in fog many times, and in that situation, accurate radar is critical. I was disappointed that I couldn't get an open array radome on my boat (wouldn't fit on the radar mast), and if I can get improved radar even for $7K, I might go for it.
 
I've had both Raymarine and Furuno units. From a support standpoint, Furuno wins hands down. They stand by their products and they react quickly when a problem arises. We all know that the Navnet 1&2 had some weaknesses in the plotter area, but they've really addressed this one!

Comparing prices (and I was open to try the new Ray G series because of the great radar reviews), the Navnet 3D is simply better in every respect, at least from what I know now.

I'm not happy with the prices and available radars from RM. 4kw is just a bit small, 6 is perfect for me, 12 is too big (too much power draw for no real gain to me). Furuno has more available options, including radomes for those who prefer that.

I'm not sure how well the G series will perform, speedwise, because I was really dissapointed with the E series speed. No matter how good it is, I'm willing to be it won't match the Navnet3D.

Raymarine is either going to have to release something spectacular or we'll see a shift in the market leader next year. I don't see anybody buying E series hardware, when it's more money than the Navnet3D and you have to add charts where the Furuno includes them. It's interesting....
 
Dave,
Open array is one style , Dome is another. UR post said the open array ray dome wouldnt fit. Open array is does give a better return on targets then a Dome. Thats about all i know ... sorry.

Rob
 
At the October Annapolis boat show, I was hitting up the raymarine guys and they said the C series was out (will not make)in a year and that the new improvements in the screens whould change the whole size shape of things. I did not ask about the E series.
 
Dave,

I have a 4Kw Garmin dome, which I believe is digital. I've been caught in thick fog and could see and clearly identify a 30' mainship pilot style boat behind a day marker at 2 miles out. My understanding is that the 4Kw over the 2Kw is greater range overall and greater sensitivity at shorter ranges. Before this I had a 2Kw open array that seemed to provide even more detail (more crisp) than the dome, but the dome seems fine for how/where I boat. The new one is networked and lays over the charts if I select it. I have actually seen (and avoided) a wooden box floating in the water with just 2' exposed at 1/2 mile with this unit.

Side note: I was approaching the marina entrance in thick fog. I could see the entrance and the building at the entrance on the radar. To my horror, as I approached the entrance, there was an 80' yacht dead in the water and stalled sideways across the entrance, but being masked by the building's radar return. I was at idle, but could have easily t-boned that guy if there wasn't a little clearing in the fog at the last minute. My conclusion is that radar is a great "supplement" to a good and careful look out.
 
I'm not sure what my kw is in my radar, I forget. I'm sure it was the highest I could get. I'm interested in finding out if the new "digital" Radar would be an improvement over what I have, with the same size/power radome. I don't generally feel the need for radar when traveling at idle speed inside a harbor, but it's invaluable out in the open water, where you're less likely to have issues with returns being masked. When in open water, I try to stay at least a mile away from any other boat, just to be safe.

PS - Skeeto, apropos of nothing, my last boat had the same engines you have in yours. I've always liked Cummins. I have the common rail QSC engines in my current boat, which are very nice.
 
Back
Top