Simple Depth Finder needed

To be honest I'd get a Humminbird; Boatfix has em for not much over $100. They've been around for a LOOOOOONG time. You'll get a transom-mounted transducer but properly mounted they WILL stay put. If you boat is not aluminum you can epoxy the transducer to the inside of the hull. They'll sell you a special-order through-hull transducer but I'm not sure it's worth the expense unless you run REALLY deep water. Check Humminbird's web site.

I've been running a $99 Humminbird (probably more today) in my 35' houseboat (transducer epoxied in as mentioned above) for years now and the only complaint I have is the digital readout (it also has the "chart) is only to the nearest foot. In MY waters 6" is important. Otherwise, it's great.

Next choice (equal) would be a Lowrance. I had a Lowrance combo sonar/gps unit on my fishing boat and it DID read to the tenth-foot. I had good service from it for years; it was still on the boat and working fine 8 years later when I sold the rig.
 
I'm curious about the want for a numbers only depth finder.

Have you ever run a "fishfinder" (I guess I consider those to be depthsounders) and noticed that the automatic numbers often are confused and don't always display the correct depth?

For that reason, I've always been extremely hesitant to ever consider the data given by a numbers only depth finder as anything but trivia. If you watch them constantly, you can often kind of tell when it has "really" locked onto the bottom, or is getting confused (quickly changing numbers).

The only way to really know what the depth is, I have found, is to learn to use a full function depth sounder (what many call fish finders), that displays the sounding information, along with a depth scale. The ones I like best are those with a high quality thru hull sender, and a good quality interface that allows me to manually control the power and gain in conditions where the automatic functionality is jumping around, and displaying echo's and multiple phantom bottom's (Usually confusing the auto features). I know what the depth is by interpreting the graphic display, against the scale.

This is what I use when I want to know just the depth, with a high degree of certainty, and I'm not looking for fishies.

Just an opinion on the trustworthyness of numbers only depth sounders.

bp
 
Yes you DO want a "scale" or "chart"; numbers-only is NOT reliable.
 
joe...
installed a raymarine st40 this spring. required a 2" hole in hull but if you have a solid hull you can glue the transducer direct. anyway it works great and has LARGE digital numbers. easy to see. i like it.
bob t
 
Bob T

Can you give me a rough idea of the cost? Did you get the raymarine form Boatfix?
 
try a cuda by lowrance/fish eagle (~$80 at walmarket) the fish eagles work just fine and at shallow depth too.

jan
 
http://www.boatfix.com/shop/scripts/prodView.asp?idproduct=24615 Joe, I think what BobT is pointing to has a boat fix price of $ 205……

And of course, you get to hassle Mike for free if needed :)

BobT, please read what you agreed to when you signed up, and appreciate the free helpful forums and competitive pricing. I've been buying boat parts for along time. I know what added value is worth.

Stan
 
Thanks Sandy :)

fountain27's "Rope with brick attached to the end? :)" has some merit.

Joe....my exterior transom mounted ducers either flipped up or came loose also.

We have a "shoot thru the hull" which has performed well.

Stan
 
quote:

Originally posted by Estimator

fountain27's "Rope with brick attached to the end? :)" has some merit.





In the old days, they used a piece of lead with a concave bottom. Filled it with wax so it would not only tell the depth, it would bring up a sample of the bottom.
 
Back
Top