snap helper tool?

defboat

Member
Joined
Jul 29, 2002
RO Number
9541
Messages
150
Believe I read somewhere here about a small tool that helps a weak armed snap the canvas? Any websites, or recommendations please?

Thanks!:)
 
At the risk of inflaming our gracious host this is the BEST tool I have ever found for helping with snaps on a boat. The common tool people recommend can easily cause damage IMHO



I've not seen this on Boatfix or any place else for that matter but it works great for me.
 
Where did you get it? What is it called? Who is the mfg?????

I want one!

BTW, defboat, if you unzip the top zipper to within an inch of the end, you will find that snaps are easier to close. Then rezip the top. I usually start my zippers and inch or two, then snap the snaps closed, the finish closing all zippers. Seems to make it a bit easier.
 
I have a snap tool exactly like that that I picked up at the Sea Ray dealer's marina. I'm sure many boating stores and marina's have them. The only problem I have had with THAT one is it tends to cut through the snaps after several times if you're not careful. I did see an ad somewhere for one that was plastic and didn't look as sharp. The one pictured here does work well, however.
 
Since I've lost a lot of my arm and hand strength, I have to find ways to give myself that added leverage! But that tool may be something to help too.

Another hint is to never leave your zippers unzipped or your snaps unsnapped when you leave the boat for the week. If you do, there will be shrinkage, especially if the weather is still cold, and it will be harder to close up the next time. If that happens, try closing things up while the air temps are in the 70s. That helps.
 
I have looked high and low for that tool having purchased one years ago at a marina somewhere. The site you go to when you click on the picture is the ONLY place I have been able to find them in several years. If Les stocked them I would buy a dozen or so and give them away to friends as gifts. They are that good in my book. They grip the snap head perfectly and give you major leverage to pull the canvas to the snap. I've never had one cut the canvas but I guess it could be possible if your not careful. The tool comes in VERY handy when you are putting an enclosure up for the first time in the season when temps are still cold and the canvas is in the shrunken state.

BTW - I have ZERO, NADA, ZLICH, NOTHING to do with that product or site, financially or socially. I would link to the manufacturers site but I can't find it!
 
Oh my gosh! I went to the website to order and they want me to pay $11 for shipping UPS Ground!!!! That is ridiculous and they offered no other carriers.

Les, can you stock these so I can order on from Boatfix????
 
Could this be God's gift to hands and fingers?? Am tired of lubing my snaps with blood...

[:-magnify]
 
Les, that's the one I have. Although I rarely use it, it does help when I needed it.
 
I use the same one that Les posted. Works great!
 
I use Chap Stick or Blistex to lube mine now....my blood doesn't match the green/white hull of this boat...........it wasn't a problem when the last boat was red/white. LOL

quote:

Originally posted by inkblue

Am tired of lubing my snaps with blood...

[:-magnify]




 
quote:

Originally posted by Les Hall

I'll check to see if we can become a dealer - here's one I like better - directly from the manufacturer.





Thanks Les! That is the tool my former canvas guy used. He promised to sell me one, then went out of business!

Ironwood only charges a flat $5.00 shipping.
 
For some reason I have never been able to use the one Les recommends. Always seemed like it was going to tear the snap off. The one I pictured seems to grasp the snap itself. If you can get them Les I'm good for a bunch to use as gifts!
 
The one that rommer showed is same price as one Les showed. Rommers will ship UPS for $7.92; at least to central NJ. So you're looking at just under $28.00 .
 
I saw one that was by Ironwood but looked like a modified wooden-handled putty knife. No second claw like the plastic-handled one liked by Les. And more expensive! Let's hope Les can get to dealing in those!
 
I just got this Tarp-Tool, I hope it works...

tarp_tool.jpg


No more bloody fingers.

[B)]
 
I have the one rommer listed. Two actually, the first was delrin or similar and the second aluminum. Both work perfectly and the best I've used.

The only problem is I can never find either one of them.

bp
 
Back
Top