Soda blasting

FinnBill

Member
Joined
Apr 4, 2005
RO Number
16856
Messages
147
I want to get the bottom paint all taken off this year and repaint. Several layers deep of flaking ablative paint. Is soda blasting a good idea and is anyone in the Baltimore or surrounding areas recommended? Cost? Can you rent equipment and do it yourself?

33 foot power boat year 2000
 
My boat is being media blasted today, so I can't tell you the outcome yet. My cost on a model year 2001 37ft x 13ft boat is $1050.
The equipment is available for rent, but here in my marina, they do not allow DIY, due to EPA/DEC regulations (so I am told).
 
The advantage of soda blasting is that it is non-hazardous and does not require reclaiming. It makes a mess, but just consider it a "nuisance" dust. It is water soluable and will be gone after the first rain. Where ?? That could be a different story. Some towns have ordinances about anything being drained to the "earth"
 
It is not the media material that posts a hazard, but rather the bottom paint.
 
Gary, $1000 for a 37 ft boat sounds like a good deal. I would have gladly paid that when I was 1/2 way done removing the bottom paint on my last boat! Never again.
 
I just received a phone call that the boat is done! They informed me that all bottom paint was removed and the barrier coat was preserved, needing only minor touch-up. That should save me a few hundred dollars.
 
My marina keeps telling me no soda blasting it is bad for the hull, they prefer sand blasting. I don't believe them someone give me some facts on the difference and the pros and cons of the 2 ways of removing years worth of bottom paint on a 40 boat?
Bill
 
"The advantage of soda blasting is that it is non-hazardous and does not require reclaiming."

It's the old bottom paint mixed in with the used soda that makes the reclaiming necessary in many areas of the country.
 
For what you are doing, sandblasting and soda blasting are basically the same animal. Sand blasting can cause cancer via silica remnants. Soda blasting is like shooting Arm and Hammer at the hull.
 
I wouldn't be doing it a contractor that works for the marina would do either. David you mention silica does that mean the hull would need some sort of wipe down with a solvent prior to repainting it? I was worried they would destroy the gel coat with sand blasting. Again I don't know squat about paint and boats. Bill
 
Soda blasted a 36x13 foot combination hull last year for 1200 bucks (hired out). No complaints other than assure the area above your water line is taped off to avoid overspray damage (fogs the glass requiring buffing). Did a great job cleaning up the props, shafts, rudders, etc...
Don
 
We had a hull blasted with walnut shells which was before soda blasting became available. The advantage at the time was it did less damage to the hull than sand blasting. Still we had small voids exposed that required faring followed by a barrier coat and then ablative paint. The result was excellent and we were pleased. My opinion is soda is probably easier on the hull than walnut shells and I would select this approach if doing a bottom job today.
 
I just had a Californian 34 sand blasted to remove the old bottom paint & open any weak blisters/voids for filling & barrier coating. Gel coat was roughened up a bit. Work was done at Weavers Marine in Essex. Cost, including materials was just under $900.00.
 
Soda blasting is far preferable to sand blasting. Although gel coat damage can be done with soda blasting, it is less abrasive, and less likely to damage the gel coat or laminate. I have seen a number of boats which developed blisters after sand blasting, and had gone 10 to 15 years without blisters previosly. If the boat already has blisters, it is preferable to dry the boat, after doing a carbide peel. Sand blasting can leave sand imbeded into the laminate. Any blasting needs washing and drying after the process.

Agree that the old bottom paint is the toxic element.
 
I haven't seen DIY around B-more. Strange connection, but the place I got to get my car wheels repaired and tires mounted bought a Soda Blasting truck (in AA county). They're selling it as they can't make any money on it. I put bottom beaching shoes on my hulls about 18 months ago and they wanted over $500 to remove about 8' of bottom paint from each hull. I had a yard sand it off (with a vac connected...no mess) for less than $120. It's a good process, but as others have said, make sure they prep the heck out of your boat and the area first. That, my vendor said, was what made it so expensive.

Sorry to do this, but I have to ask...why remove ablative bottom paint?
 
In my case, ablative paint had never been used on my boat. I will be using it for now on to avoid yearly painting and build-up.
 
I think it's all ablative...I bought the boat used and there's some areas where the paint has flaked off and some areas where the paint stayed on and has built up. Each year (or two) when I bottom paint, the areas that flake get a even two coats of new paint. And the parts that didn't flake also get two more coats. So it's getting to look like the Badlands....would be nice to get it all off and start smooth. I don't know the more I think about it, the more I think I'll try just touching up the flaked areas next time and see if the built up areas catch up. Not a big deal.

thanks all
 
quote:

Originally posted by Billylll

I wouldn't be doing it a contractor that works for the marina would do either. David you mention silica does that mean the hull would need some sort of wipe down with a solvent prior to repainting it? I was worried they would destroy the gel coat with sand blasting. Again I don't know squat about paint and boats. Bill






Silica is the dust that remains airborne. It's the same stuff that is in cat litter. It is not uncommon for cats to get silicosis from it.

http://en.wikipedia.org/wiki/Silicosis

The hull will have to be wiped down regardless of how it is tended to. As long as you paid to have it hauled and blocked, you might as well do a full detail after it is bottom painted.
 
I had a quote of $15/foot + material. I think it would come out to $550-$600 for everything for my 32 foot.
 
Back
Top