Stern Thrusters

Crossroads

Member
Joined
Jan 1, 2000
RO Number
2208
Messages
308
Anyone seen or used one of those stern thrusters that mount outside the stern of the boat. There's some interesting advertising videos on a few websites. I don't know how well they work but they are considerably less expensive than a bow thruster plus there is no glass work needed. Check out the video on this site:http://www.capsante.com/Pages/thruster.html
 
My buddy put them on his Bayliner 3888. Had to upgrade to 24 volt model as it was underpowered at 12. Works well and he likes it.
 
I helped teach my neighbor how to drive his twin-screw aft cabin that's equipped w/ a transom-mounted stern thruster, but no bow-thruster. It's almost entirely useless.

They can be helpful when paired with a bow truster or when installed on a single-screw vessel, but frankly I forgot it was there most of the time and would never recommend installing one.
 
I dont see much of an use of a stern thruster is you have twin-screws.
 
I don't see much of a use of a stern thruster if you have a single screw, either.
 
It might have some use in tight quarters where you can't back and fill, but I think it would be much more useful on the other end of the boat.
 
Pretty soon maneuvering a boat will become more complicated than a controller for an X-Box

2 shifters
2 throttles
1 Joystick for a bow thruster
1, or more joystick(s) for stern thrusters

In the meantime boat crashes while operator is confused over which lever to use.

I see no value to a stern thruster for either a twin engine or single screw set-up.
 
Well actually ITK, the trend is going towards simplification. It started with D.O.C., which integrated the control of the sterns thrusters and the bow thruster into a single, intuitive control. Now IPS and soon Zeus perform low-speed manuevers with only joystick.
 
ITK... that's what happened to my neighbor last year... VERY experienced boater who could do anything with his single engine sailboat. Now in a twin engined trawler with thrusters he was getting confused... two many things to handled and rammed me coming in.

we spent a few hours training after that, never touching the damn joystick and he did great.

i dont 'see what a stern thurster can do that rudders and gears cant. you want to move the stern sideways, put the rudders hard over and use propwash. same thing.
 
I'll have to agree with Pascal in the fact that you want to reduce the number of variables to as few as possible.

I had a great flight instructor that taught me that with flaps, pitch, power. If I started making tons of adjustments all at the same time she say: we're not baking a cake!!! (hands moving all around)
 
I have a Meridian with Docking on Command (Bow and Stern Thrusters with single control) A stern thruster without a bow thruster is almost useless. I try not to rely on either. Both thrusters are nice when used together. You can walk the boat sideways to or from a parallel dock and you can use them both in opposite directions to quickly spin the boat. That is nice in a very tight space and to help steer if you want to turn the boat in place.

The only time I use the stern thruster by itself is to move the swim platform into the dock with the handheld remote so people can board easily.

I also use the thrusters to move the boat into the dock to make it easy for the dock boy at my marina or anyone else helping me tie up. I leave my lines on the dock and I never have people standing on the bow or stern tossing lines ashore. All line handling is done from the dock.
 
That's a great commercial. Abalmuth, if you can dock your boat like that, I'll pull out both my thrusters and sell them on eBay.
 
"2 shifters
2 throttles
1 Joystick for a bow thruster
1, or more joystick(s) for stern thrusters"

(Not to mention the steering wheel)

I don't think I could handle all those gadgets... I have one shifter, one throttle, and the wheel (and only TWO hands)!
Somehow I get by.
 
The problem is not with all the gadgets but with the boater who doesn’t spend the money or time to learn how to properly handle a boat weather it be sail , power.

For those power boaters who have twin screws down to a science don’t try to handle a sail boat of any size without help and vise versa although the sail boater would have the advantage swapping helms in most cases. JMHO. Having a huge keel in the water on a sail boat has it’s own challenges most power boaters never take the time to understand.

Having a stern thruster is clearly a waste of money unless as some have said you have a bow thruster But not needed.

Hire a captain and learn the right way first then put the cash you would have spent on a stern thruster in your pocket if it will fit there. Your dock mates and passengers will appreciate it. Don’t waste 10 years of boating like someone I know being TOTALLY clueless.
 
I have to agree with MichaelNJ, I also have a Meridian with DOC, it can come in very handy, especially on a windy day. I cant tell you how many times it has saved me from scraping someone elses boat while docking when a gust of wind comes out of no where. I do not try to use them at all when docking, but I can guaranty that I allways have them on and in the ready just in case. For those of you that have never had them, once you do, you will never go back to not having them, they are a convienance to have, and can save you many embarrasing moments with the flip of a button!

Perfect example of how great they are to have,I was dropping off some passengers that we picked up on a broke down boat, in the middle of the night, the marina was full and only one space was open that could accomodate my boat, tight as it was, I only had one to two feet to squeeze in to this spot, bow to stern, comming in on an angle,and I wound up using my thrusters to walk the boat side ways, while using forward and reverse to hold the boat steady in its place while fighting the wind to my bow and the current from the stern. There were a lot of people there shaking there heads, including the Admiral, but after I got those people off without hitting anything, we heard some applause! Would not have been able to do it without the use of the thrusters.

I would not waste my money on just a stern thruser(pretty useless) unless I was getting a bow thruster as well.
 
I could be mistaken ( I frequently am) but I think all boats have a pivot point somewhere around mid ship that the boat will pivot around if a lateral thrust vector is applied from the bow or the stern. Therefore, a bow thruster or a stern thruster should give you the same results if used separately. Using both at the same time in opposite direction will make the pivot faster and using them to apply thrust in he same direction will move the boat side ways.
 
Back
Top