through hull valve question

Tiki Time

Member
exMember
Joined
Aug 20, 2007
RO Number
28380
Messages
186
I'm replacing my AC through hull 3/4' ball valve. The question is what is the best pipe dope to use?
Is it Never Seize or something else.I dont know what the previous owner used but I had no problem unthreading the valve. I also smelled orange near the threads.
 
never sieze is not a sealer. use rector seal or any non silicone sealant on the threads. For seating the through hull Marinas frequently use 5200 to avoid call backs.
 
You can use the same pipe dope plumbers use. Get it at your local home center. There is not much pressure on these connections. Far less than what you have in a land based water supply system.

I figured out on my own that pipe dope is better than teflon tape for these connections because you're assured of electrical continuity with pipe dope. Possibly not with teflon tape. It's open to argument though. ;)
 
Thanks for the advice Bruce.

5200 it is. I think I have that in my garage.

Had great trip south! Moss Marine was great! Thanks for all the advise.
 
I think pipe dope was used previously and worked well.
thanks, I dont know why i was thinking never sieze. I'm glad I asked now.
 
quote:

Originally posted by Tiki Time

I think pipe dope was used previously and worked well.
thanks, I dont know why i was thinking never sieze. I'm glad I asked now.






Pipe dope is made for - sealing pipe joints. It's good for that.

Marine sealant (5200, 4200, etc.) is made for sealing cleats, trim tab mountings, etc. It's good for that.
 
Back
Top