Good one, adru, got one of those too but use the tripod 20x as much. I bump into stuff with my big head, but there are definitely times when those head lamps are invaluable. I use an led work light wand a lot too. Slides into places other things don't fit into and casts a bigger light than a flash. Actually I have a slew of lighting devices each of which has come in handy at one time or another.
David, I guess my original point was before I got carried away, which I am about to do again, is that while I have one of those big sets, I hardly ever use it. That little 8 piece ratchet or "gear" wrench set really is handy, plus a handful of others in odd sizes.
All the stuff I have listed (plus most of what I am about to list) could fit into a normal size tool box if need be, with plenty of room for other stuff. I have the luxury of a fair amount of space, so I can segment stuff into various drawers and plastic tubs around the boat.
Bill's 90 degree drill/screw driver is a handy item. So is a Dremel, but I haven't got to that yet so it must not be necessary. Since we are on a roll here, let me add some of the secondary, but darn-necessary-when-you-need- them items (that is, not used everyday, but non-optional) A lot of this stuff, with a couple of exceptions, Harbor Freight quality is all you need:
One of those infrared/laser thermometers (actually I use this all the time when doing ER checks). A small vice. An assortment of files, especially rat's tail and half moon. A good tape measure. Hose cutter. Mini and regular sized hack saw. Scissors. A couple sizes of vice grips and channel locks. The best serrated folding knife you can afford, preferably with a marlinspike on one side. Tweezers. Grease gun. Bicycle pump with needle for inflating fenders and pumping up other stuff you didn't think of, such as steering and engine control hydraulic reservoirs. Flair wrenches that fit your fuel and hydraulic fittings on board. Battery terminal extractor. Impeller removal tool. Hand held mini sledge hammer. Copper and synthetic stiff brushes. Many flavors of sand paper. One of those paint scraper/putty knife thingies with the hook cut into one side. Big towels that can be sacrificed. A long funnel and a short one. If you have wet cell batteries, one of those battery fillers that NAPA sells (I have a bunch, so that item probably belongs in my first list). Then there are all the pastes, liquids, tapes and other not-hard stuff, that's another thread as are spare parts.
OK that completes my short list, that fills out the 80-20 rule. i.e. the 20% of the stuff that does at least 80% of the work. More like 98% in my case. There are a bunch of things I didn't list because I rarely if ever use them and something else will get you by. I am not particularly handy, I just want to keep the boat going and floating and the crew happy. I am not a tool nut or the kind of guy that can tear down a diesel engine and put it back together. In fact, I am kind of a klutz. If I can save a few hundred bucks by not having to hire someone to do something simple, so much the better, but a lot of the places we go that someone isn't right around the corner anyway.
George
David, I guess my original point was before I got carried away, which I am about to do again, is that while I have one of those big sets, I hardly ever use it. That little 8 piece ratchet or "gear" wrench set really is handy, plus a handful of others in odd sizes.
All the stuff I have listed (plus most of what I am about to list) could fit into a normal size tool box if need be, with plenty of room for other stuff. I have the luxury of a fair amount of space, so I can segment stuff into various drawers and plastic tubs around the boat.
Bill's 90 degree drill/screw driver is a handy item. So is a Dremel, but I haven't got to that yet so it must not be necessary. Since we are on a roll here, let me add some of the secondary, but darn-necessary-when-you-need- them items (that is, not used everyday, but non-optional) A lot of this stuff, with a couple of exceptions, Harbor Freight quality is all you need:
One of those infrared/laser thermometers (actually I use this all the time when doing ER checks). A small vice. An assortment of files, especially rat's tail and half moon. A good tape measure. Hose cutter. Mini and regular sized hack saw. Scissors. A couple sizes of vice grips and channel locks. The best serrated folding knife you can afford, preferably with a marlinspike on one side. Tweezers. Grease gun. Bicycle pump with needle for inflating fenders and pumping up other stuff you didn't think of, such as steering and engine control hydraulic reservoirs. Flair wrenches that fit your fuel and hydraulic fittings on board. Battery terminal extractor. Impeller removal tool. Hand held mini sledge hammer. Copper and synthetic stiff brushes. Many flavors of sand paper. One of those paint scraper/putty knife thingies with the hook cut into one side. Big towels that can be sacrificed. A long funnel and a short one. If you have wet cell batteries, one of those battery fillers that NAPA sells (I have a bunch, so that item probably belongs in my first list). Then there are all the pastes, liquids, tapes and other not-hard stuff, that's another thread as are spare parts.
OK that completes my short list, that fills out the 80-20 rule. i.e. the 20% of the stuff that does at least 80% of the work. More like 98% in my case. There are a bunch of things I didn't list because I rarely if ever use them and something else will get you by. I am not particularly handy, I just want to keep the boat going and floating and the crew happy. I am not a tool nut or the kind of guy that can tear down a diesel engine and put it back together. In fact, I am kind of a klutz. If I can save a few hundred bucks by not having to hire someone to do something simple, so much the better, but a lot of the places we go that someone isn't right around the corner anyway.
George