Trailer Brakes

Brian Suhl

Member
exMember
Joined
May 9, 2001
RO Number
4517
Messages
168
Any of you guys ever mess with electric trailer brakes? I just bought a Jeep Wrangler that is in Wisconsin about 250 miles from here. My dad has a two year old flat bed trailer that he uses to haul antique tractors and I want to borrow it to get the Jeep. I am driving an '08 Tahoe that has a factory hitch and the big round plug all wired up from the factory but it does not include an electric brake controller. I am wondering if I can buy a controller and just hook it up to some possibly existing wires or if there needs to be a bunch of wires run. I don't want to make this any more difficult than it needs to be and Dad is out in Vermont staring at the leaves so he is no help. If the brake wire is already there in the factory harness it would make the job pretty easy I would guess.
 
Your '08 should already be wired. Most likely all you need is a controller and possibly a adapter for the wiring harness. You can get info as to exactly what you need on a number of websites....
 
A new controller is less than a hundred bucks and well worth it. You can use it on other vehicles as well, although if you've got an '08 you may not be in the market soon for a new vehicle.

That controller will give you a lot of peace of mind when towing. It sure is nice to be able to stop!

I've set up a couple of different controllers and it's not that difficult to do.

Peter
 
I am also considering renting a car dolly from U-haul that lifts just the front wheels off the ground for towing. They have surge brakes and the Jeep is a manual transmission and 4x4 so I could kick the transfer case to neutral and the trans in neutral. This just might be easier as I would never likely tow anything again with electric brakes and with my luck the controller could turn into a pain to install. It has to be ready early Thursday morning.
 
Brian, the install of the controller should be child's play. Your '08 sounds like it has a trailer package so all the wires should already be in place.
 
I think the dolly sounds like a good option. The trailer may weigh as much as the Jeep. Put the transfer case in neutral, and the Jeep is good to go. The jeep will weigh about 3,400 pounds. Should be a piece of cake for the Tahoe.
 
You may end up needing an adapter to go to the trailer or dolly. There are many to choose from so that shouldn't be a problem. I think they even sell them right at the Uhaul store. Brakes are very important on the trailer.
 
Back
Top