Trailering Question

Michiboat

Member
Joined
Mar 20, 2008
RO Number
29654
Messages
37
I have a Sportsman Trailer for my Chaparral. It is a great trailer, all Galvanized but it has the old carpet on wood runners in the middle. You have to have it deep in the water and the boat floating to get it off. Putting it on is a real art as well! I have to back it so far into the water that my van I haul it with has the tailpipe submerged and it sometimes spins the tires and won't come out and I have to ask for a tow!

My question is, rather than buy a new 4 wheel drive, can I just replace the old carpet runners and put on rubber rollers and see a significant ease of loading, but particularly UNLOADING the boat. I can get the outdrive in the water and get some pull, but even pushing it on the carpet runners is almost impossible!

Any ideas?

Michiboat
 
Rollers are a good choice. Less resistance. There are some that'll center your boat as it comes up the trailer. The old wooden runners covered in carpet are called "bunks". Not the best choice for a larger boat. You'd need someone who can weld you in some new brackets to support the rollers. I've never welded galvanized steel before but I believe it's hazardous. Proper priming and painting afterwards will be essential to prevent corrosion. I know guys who drive their boats up and off their trailers. As long as you've got enough water under the drive(s) it's doable.
 
How about installing some bunk "slides" to the bunks that allow the boat to slide more easily? I've seen them in trailer boats magazine. Something like this:
5200.jpg


Boatfix.com has some similar items: http://www.boatfix.com/catalog/203.pdf
 
I also drive it up and off, but again, it has to be in deep water and the side rollers are underwater. I am getting some bike flags today to go on the side rollers so I can see them.

Thanks for the advice on the rollers. It has some, and it has the "bunks", (thanks!) on it too!

I love the idea of the slides! Will try that first, and if that doesn't help, I will go the roller way. I have a good friend who can weld the brackets on.

Thanks!!!!!!!!!!!
 
you rollers might not be adjusted correctly and too much is on the bunks. careful with those slicks, that's exactly what they are. come in too fast or disconnect the strap from the boat too early and watch out. you can also get food grade silicone and spray your bunks. it washes off after a few dunks, reapply.
 
I'd try a steeper launch ramp! Then the boat will float before the van is too far into the water. Is this a front or rear wheel drive van?

When you retrieve, how far do you winch the boat onto the trailer? The farther you winch the boat onto the trailer means more weight is transferred to the rear axles of the van. That will give you traction (assuming rear wheel drive) so you won't have to require a tow coming out.
 
Naw, dont change nothing. I love watching those guys antics at the ramp!:)

Will Re-doing the toung into a break-open give you what you want?
 
Many years ago I trailed a 22' sailboat... To launch the critter I'd tie 20-30' of line to the trailer tongue, and the other end to the hitch on the car. Then unhitch the thing and let it go. It always worked, but it was always exciting for the spectators who never seemed to see the line and thought I'd lost the trailer!
 
I can't remember the name but there is a spray lube for carpeted trailer bunks. It works very well in fact maybe to well as i have heard of boats being dropped on the ramp because they either didn't leave the safety chain hooked as they were backing down the ramp.
 
Old carpet tends to have more drag than new carpet. Changing the carpet would be my first step.

Ken
 
I would try the lube or new carpet and lube. The slides look like individual pressure points to me.
 
I like rollers. I have had trailers each way. The Easy Loader with rollers was my favorite. A trailer with properly designed rollers will support a boat just as well as bunks.

That said, I would doubt that you can convert a trailer made for bunks into a trailer with rollers and have proper placement of the rollers for good support. You may be able to acomplish this, but it would be difficult.

G
 
Lemon Pledge for making the bunks slick.

How about an extension for your ball?
IMG_3212.jpg


Or maybe a front mounted extension?
IMG_2419.jpg
 
quote:

Originally posted by Riverratt

I would try the lube or new carpet and lube. The slides look like individual pressure points to me.






That worries me as well. We found it really depends on the ramp though. The ramps in FL are designed well and are very steep/deep. No problems for our 30'. But home in MD I end up paying a travel lift to load the boat on and off as the ramps just aren't deep enough. I did see some trailers in FL that had portions of carpet replaced in areas with Starboard (flush with the carpet). It looks like it would certainly help with loading/unloading, but then I'd worry about the boat "walking" a bit on the trailer while hauling. Liquid Rollers mentioned above (same link Bob posted for the glides) does work, and it's pretty cheap.
 
Back
Top