Transom

dritter

Member
exMember
Joined
Oct 18, 2005
RO Number
19332
Messages
216
Went to the boat this weekend and waxed the sides and painted the bottom. While painting the bottom found 4 holes where a transducer used to be. Previous owner must have painted over them and I never saw them. Nothing in the holes!!! It is a 32' st. tropez. Not much to the transom and the place I have it stored put a moister meter on it and it pegged out. I told them to shoot some screws in it with 5200 and I would worry about it next year. What do you guys think. No weight on the transom because it is inboards. Get through the summer and worry about it over the winter. Not much wood to this transom since it is inboards.
 
What is the transom made of? Is it cored wood, if so, you can have a problem. Better to get it fixed now than pay much more later.
 
Not sure what is in there! Can not find any info on it. I went there today and drilled the holes out and cleaned them. The bit went in about a half inch then hit something hard. The glass is pretty think back there. I shot some screws with 5200 on them and I am going to have someone check it out next week. I talked to one fiberglass guy and he said there should be no wood back there. It seems like there is a void that might have been filled with foam. Not sure!
 
I'd do what Hogan said and find out now. You might need a surveyor here if your boatyard can't give you the answers you need. It might have beed a better idea to leave the holes open over the winter so water could find it's way out.
 
Call Wellcraft, I am rather certain they will know the transom core material.
 
99 times out of 100 there's wood in there! It's far too thick for solid glass. Got to be dried out!
 
Called Wellcraft and they said there is some wood in the transom, but not a lot. He said there are strips of wood and you would find voids in the transom. He said the main thing is to get the water out which I think I did. He said to drill from the inside.
 
Back
Top