Well the original poster has not re-appeared....but gas engines do fine at continous low speed--and so do most diesels as long as you keep them up to operating temp, and every hour or so, spool up the turbo charger (if so equipt). I had many thousands of hours on Perkins and Ford Lehmans at 1300 RPM with zero problems.
Many of the Taiwan trawlers (and others) came with teak decks. Unfortunately often the deck structure below this was not well sealed, the teak was not properly bedded, screws worked loose, owners scrubbed or sanded off the bungs over the screws--and water intruded into the plywood--or Mystery Wood--core of the deck. Then rot and a major problem rebuilding the decks.
I personally don't consider a boat which will do planing speed a trawler--traditionally the trawler was derived from fishing boats--were displacement or maybe semi displacement hulls, and traveled at slow speeds. More recently the "fast trawler"--probably more like a motor yacht--have been in vogue. Many of the boats called trawlers are hard chine, with fairly flat bottoms and if you put enough HP in them, they would plane. "Voyaging under Power", a book originall by Bebee and more recently by Jim Leishman (Nordhavn Yachts)--has multiple graphs of HP/speed/range or fuel consumption. The more effecient vessels were at 6 to 7 knots, had rounded hulls, and relitatively narrow beam.