Trick Davit System?

outoftheblue

Member
exMember
Joined
May 19, 2007
RO Number
26367
Messages
19
Does anyone have any experience with the Trick Davit System? I am trying to find something that will work with my high swim platform and this seems like an option. Inflatable dinghy with 6hp outboard is what I'm trying to store, launch and retrieve.

thanks much.
 
quote:

Originally posted by outoftheblue

Does anyone have any experience with the Trick Davit System? I am trying to find something that will work with my high swim platform and this seems like an option. Inflatable dinghy with 6hp outboard is what I'm trying to store, launch and retrieve.




I have no experience with davits and I’m looking at them for my boat as well-My swim platform is 14” above the waterline so I have a height issue as well-
the Trick system looks interesting & the idea of the rollers is appealing-their site says that “Brackets and cradles are constructed of non marking industrial strength Marine Grade Polyethylene and assembled with stainless steel hardware” -- but It looks like it is assembled from many parts, many parts that can come loose over time, after all this is on a moving boat-
I have been looking at the Hurley system lately, “white powder coated and constructed with light weight aircraft aluminum, stainless steel fasteners and hardware “ the major complaint I have seen about these is high price, but it look like it’s only $40 more(889) than the Trick system and a very simple construction-simple can be good
I think some of the RO’s who have Davits will jump in soon and enlighten us
 
As an owner, the "white powder coated" metal is crap. After only a few years the powder coat is all bubbling and flaking off. Looks like hell. His product is way over priced for what you get. You can get them made for much less than what he charges.
 
BTW Andy, you will NOT be happy using that system on your boat with a 14" height above the water for any dingy/motor combo more than 100 lbs or so. It just doesn't work well for high swim platforms. I have 114lb rib with 78lb motor plus fuel and gear and pulling the dink up on to the system with my very low platform is "challenging"
 
quote:

Originally posted by rommer

BTW Andy, you will NOT be happy using that system on your boat with a 14" height above the water for any dingy/motor combo more than 100 lbs or so. It just doesn't work well for high swim platforms. I have 114lb rib with 78lb motor plus fuel and gear and pulling the dink up on to the system with my very low platform is "challenging"




John
Thanks for the feedback, it was on my short list but now on no list at all
 
i installed a davit a few years back and have been very happy with. all things being equal i would prefer a platform lift, but that was another 13-15k and i'm told my boat can't handle the extra wt. of the lift mechanism.


this set up has an 800# Rib set on the swim platform, the davit itself weighs approx. 150# and can be configured with either 12volt or 110v motor. this system will work with just about any configuration of dinghy.
 
jeebus, those brackets are HUGE. Where are you going to stow them when you want to use the platform for swimming? Awful lot of little parts too, more to corrode, work loose and get lost. The Hurley stuff is just horrendously overpriced. The prices seems to keep getting jacked up $100 ever season, no thanks. For that sort of money they ought to be stainless not powder coated.
 
99, the chocks are set up for an outboard so that the outdrive is down and inside the full beam of the boat. it is also high enough that when i come off plane the wake that sets in is not quite enough to try and lift the boat off the back. when the chocks are not needed each one is secured with two 3/4" bolts set into smooth walk over type plates, nothing to catch a toe on. it takes about 2 minutes to remove them. if you want to carry a RIB that has the weight to handle some chop and plane at the same time there are not many choices on how you are going to carry the dinghy.
 
Back
Top