vhf not working

bob t

Member
Joined
Sep 10, 2007
RO Number
28533
Messages
26
hello all..
time to go into the water up here in northern michigan and tried out the vhf today as we got ready. when turned on the unit makes a very short scraping sound and then nothing. no lights no numbers etc. power is ok as is the fuse. any ideas??
thanks

bob t
 
Buy a new one?

Actually I wonder if you might have corroded connections. Clean all the connections, including to the antenna.
 
If it were the antenna you should still have lights and numbers. If it's exposed to the weather, bring it into the house, open it up and let it dry out. If that doesn't do it replace it.
 
Symptoms sound fairly terminal... Sounds like something corroded during the off-season. It happens.

I'd a) buy a replacement and install it. This is after all safety equipment. and b) ship it off for repair. If the repair cost is moderate, fix it and then install as a backup or second unit.
 
You mention "power is ok". You probably did,but...: Did you really confirm with a VOM there is 12V or better at the + lead at the back of the VHF and there is continuity to a good ground on the neg wire?
 
Sandy's on the right track. You also need to confirm you have 12 + volts when you have the unit on and when you key the mike.
 
One of the first signs for me that I need to change battery banks while sailing, is that the VHF loses it's display. It seems to be the most sensitive to a low battery.
 
Back
Top