Walkt hrough windshield

scanman717

Member
Joined
Nov 20, 2006
RO Number
24290
Messages
32
The walk through windshield on my bow rider no longer closes properly.. The "top" latch will go in, bit not the bottom one.. Are there adjustments on the windshield or hinges that I can adjust??

Thanks
 
Very doubtful that there are adjustments. You should be able to tell by looking at it and how it is attached to the frame work. Quite often the windshield frames on either side of the pass through window gets bent from people pushing or leaning on them. I suspect either the windshield frame work is tweaked or the bulk head it's attached to has distorted. You'll probably end up shimming, bracing, or supporting the windshield frame or finding where things have sagged to correct the problem. Pictures of the problem would help.
 
I borrowed a 19' open windshield boat for three days and wrecked the windshield at the hinges.
In a boat store I found something from a Chris Craft that fixed the problem.
It was a length of stainless round stock with a threaded center piece. Similar to a reversed clevis.
It had a foot at the top n' bottome and came with stainless screws.
That was in the 70's so you might have a tough time finding that one now, but you have the idea and probably can find what you need to support the inner halves of those windshieds.
 
thud, nope you can still find them. used one this past season to support a 2-piece that started to droop. has the feet on both ends and was a turn-buckel to extend.
 
Back
Top