What Engines

gcolton

Well-known member
Member
Joined
Aug 10, 2002
RO Number
9708
Messages
2,581
I am getting close to finishing a major refurbishment project at my house. Between a condo and the house carpentry/painting has almost been a full time occupation for this retired person.

Saw this add in the paper this morning.

"25' Chris Craft Tournament Sport Fish 1974, fiberglass, twin inboard Chevy 6 cyl 250s. Boat needs repowered. Would make great charter/dive boat. $2500. 699-6389 or 200-3633 "

I may be tempted to look into this as my next project.

What kind of engine(s) would you put in the project boat? Add does not say if it is single or two engines.

George
 
George,

One of us isn't reading very well. As I read it the ad you posted says,"twin inboard Chevy 6 cyl 250s". I think that means twin engines.

A quick check of yachtworld found two of the same vintage. It appears both have been repowered. One with twin Marine Power 350 ci / 260 hp. The other with twin Mercruiser 3.0 / 140 hp.

Here is a link to the search I ran.
 
I know that boat. It's got the same hull as mine but has a second station. I've seen one around where I boat and it looks like a sweet boat. I will warn you to check for a keel. Most of these 25's before 1980 did not have one. With the second station (if it does), it would roll even more than my 1978. I would also seriously consider the engine access. I have a single and it's great. At 9'6" beam with twins? That's got to be tough. Besides that, get a survey - yes even for $2500.
 
Looks like they are a nice project boat. The 2 on Yachtworld are nice.
 
There is a lot of upgrade stuff available on the net for chev sixes. They will be narrow and probably fit well into a smaller boat. If the special marine parts are readilly available I would consider using the same engines.
 
The 250 inline sixes were 165hp. They are well-regarded as marine engines. An even nicer choice, if you could find them would be the 292 cubic inch version. They were 200hp in marine form, if I remember correctly. In a very small boat for twin inboards, it would be a great advantage to have narrow engines to make maintenance and servicing reasonably easy.
 
quote:

Originally posted by divedaddy

George,

One of us isn't reading very well. As I read it the ad you posted says,"twin inboard Chevy 6 cyl 250s". I think that means twin engines.

A quick check of yachtworld found two of the same vintage. It appears both have been repowered. One with twin Marine Power 350 ci / 260 hp. The other with twin Mercruiser 3.0 / 140 hp.

Here is a link to the search I ran.






And I know which of us it is that cannot read. I am sure that my early year teachers would really be fussing at me.

G
 
Those inline 250 have a great reputation for running forever.
I wouldn't hesitate to repower with like. Only consideration would be fuel mileage vs repower with single V8. The swap on a project boat would be a biggie. Transom may need replacing anyway.[:O]
 
the old stove bolt was as famous as the mouse engine
 
I would stick with the 6 cyl chevy marines. Fit well, all running gear should be there for those engines, and the 140's are going to be too small for performance.

Check to see if the engines are counter rotation, or if the gear box counter rotates. You may have a problem finding the counter rotating engine, and you need to check and see what is available to change the engines rotation if you need to (cam, distributer)
 
Back
Top