Window Leaks

Viking76

Member
Joined
Aug 18, 2006
RO Number
22881
Messages
92
I have an ongoing problem of cabin side windows leaking rain water into the cabin of my Viking convertable. The windows are bypass sliding glass types in aluminum tracks. All the drain holes in the tracks are open to the outside. It appears that the leaks are at the joints where the window frames were fabricated. The joints in the frame do not appear to be welded. More recent models have cabin side windows that appear to be glued in place with no frame and do not open (perhaps this eliminated a problem). Any one else experiencing a similar type problem? Any suggestions for correcting the issue?
 
I had the same problem and filled the corners with silicone but the mounting screws that go through the lower track also need to be sealed.
 
Recently dealt with the same issue on my Hatteras, one slider on the aft deck and one in the galley. Numerous attempts at re-caulking, even by some more adept than I (not saying much there), didn't get it. Finally did the right thing, pulled the whole thing out, cleaned the frames, checked for corrosion pinholes, cleaned opening thoroughly and (I hope) properly re-bedded. No more leaks, even with a hose blasting full force.

Here's a little tutorial that more or less describes what we did, and includes a link to a further discussion of window leaks.

http://www.yachtsurvey.com/WindowRepair.htm

Not sure where you are located, but I could point you to decent guys in Baltimore, North Carolina or Fort Lauderdale for this sort of work if you are not the DIY type.

George

"Incentive" Hatteras 56MY
 
Bruce and George are probably right. If you can't seal the joints you're going to have to pull the window frames, clean and rebed them.
 
Back
Top