Winter modifications / improvements?

Wishoot

Member
Joined
Aug 27, 2006
RO Number
22990
Messages
132
The boat was hauled out today and I immediately started to think of several projects I would like to work on during the lay-up.

Aside from cleaning and repairing the canvas, I was thinking of installing a new digital compass, replacing the dismal Norcold frige with an Isotherm, installing a fuel flow monitor and a couple of other things.

What are your plans?
 
A complete interior upgrade,the upolstery dude is going to eat well this winter.
 
Upholstery and a good thorough cleaning. Puttin' 'er up for sale in the spring. Everything else is pretty good to go. Doing a little more than upgrades next year, starting to build a new boat! ;-)
 
May I suggest another item. I added a LEV-O-GAGE (about $15.00) to my boat this summer to measusure list (right and left tilting) and to help me correctly set the trim tabs. I now can easily adjust the right and left tabs to get within half a degree of the boat being level side to side. Its cheap, requires no wireing, does not wear out, looks neat, and helps me compensate for wind and people changing seats. Previously I was just guessing on tab adjustment to reduce laterlal tilt.
 
Bellows job and interior upholstery. Maybe natural tile in the dinette to enhance the look of the cherry hardwood floor
 
Rupp 30' Tournament Double Outriggers and underwater lights....
 
Painting the engine room, barrier coating the hull, and Corian counter tops inside.
 
I'm going to replumb the fresh water system with PEX instead of the gray plastic. At least those areas I can reach. LEV-O-GUAGE sounds like a good thing also. Did most of the interior renovations a year ago.
 
Wishoot, I was in Fontana Wednesday working on a house on Shoreline DR. I am hopeing to still visit the lake with the boat this year. Can you see the sunken boats from the surface like on Superior? Winter projects include redoing the entire gelcoat hull. as well as plenty of fiberglass repair. Repaint the trailer, If I can figure a way to raise the boat up enough, replace the bunks on the trailer. New hoses and clamps for engine. Poly the entire interior hull. Add oil pressure gauge, and center console for holding my beers to cockpit. Also contemplateing replaceing bench seat with buckets and belts to enhance mobility, and add to apearance.
Brian.
 
Awlgrip hull and topsides, soda blast bottom and paint, remove all rails and fittings, fix delamination and replace, entire new interior, upgrades to electrical system and plumbing, new gen...I'll stop now as I am getting discouraged...LOL
 
New manual head to replace cantankerous electric, a good wax job and a thorough deck cleaning. May install some sound insulation on motor hatches as well.
 
Vacu-flush and a face-lift in the head. All new/updated bilge pumps. Maybe replace the windlass with one that works with chain.
 
Back
Top