Winter Storage - Inside v Outside?

Thompson16

Member
Joined
Mar 26, 2001
RO Number
3945
Messages
13
How many out there store inside versus outside on the hard?

Our boat is a 21 ft with a cuddy cabin - we've been storing it in a boatel in southern Virginia for the past 5 winters. My feeling is that this has kept the gelcoat and boat overall in excellent shape. (Boat is a 1998 Wellcraft Eclipse, single I/O)

Boatel has raised the rates (again) - we have the option of keeping it on the trailer outside for free.

We definitely have periods of sub-freezing temperatures and the occassional snow - full winterization is a must regardless of where the boat is kept.
 
Why not outside in one of those tarp garages?
Shrink wrap definately ruins a boat, I don't care how it's done, it is abrasive.
If I had a boat that size, I would get one of those garages, back my boat into it, winterize it and be done.
 
Why would shrink wrap be abrasive to a boat? I have had my 28 Velocity shrink wrapped and stored outside in the Buffalo, NY area (North Tonawanda). I have never observed any abrasion and I am quite anal about the boats appearance and I have had it wrapped for (9) winters. I suppose it depends on how well the shrink wrap is applied. I do have to use a little acetone to clean off some tape residue.
 
As long as the boat has protective coverage from ice and snow, I don't see how the temperatures will make much difference on the gelcoat. Is the boatel heated? If not, the temperatures are problem no different from outside.
 
If you watch them shrink wrap, they rub this tool under the wrap and against the boat. This tool protects the boat when they heat the wrap. This tool is suppose to have some sort of felt or protected bottom but it wears out quickly. I think it makes marks.

The second issue is if they shrink wrap only to say the water line or slightly above. This cuts into the glass and as they are moving it around and even after they are done and the wind moves it, it makes marks. A good way to avoid this is have them put the wrap all the way down past the water line on the bottom paint.

Just my .02. I am not totally thrilled with the shrink wrap process. I think the fisher covers are a better way to go, but they also have their issues.
 
I've stored my boat inside and then went outside.

Inside storage is very expensive for a big boat as they charge by the sq ft. Damage from the wrap - not really. The only thing I have had happen is a little rub mark on the name and I am a bit anal about taking care of my boat.

I stored my last boat outside every year but one and never had an issue. Like anything else, I think alot has to do with who is doing the wrapping.
 
I've always done outside...and I'm in WI so winter is REALLY winter.

Regarding shrink wrap...I have never had a problem with shrink wrap in the many years that I went that route. And I too am pretty particular about the gel coat. I did my own wrap though - I have the big propane heat gun. On my previous 34'er, I would spend about $200 on supplies to do it myself. That was really reasonable I thought. Paid for the heat gun in one season.

Now I have a custom canvas cover - not a Fischer, but similar and very fitted. I'm not sure what drawbacks these have, but I haven't experienced any in the 2 seasons I've used it. I'll never go without a canvas cover ever again. They are the bomb in my opinion.

But for a 21'er...even a winter cover from Overton's or fleebay would be a very cost-effective option.
 
I've done all three and currently use inside heated storage. Shrink wrap was good with no problems. Inside cold same thing. Inside heated is more convenient. We are fortunate and have lots of economical options in West Michigan. Inside heated is $5.95 a square foot and swim platforms and pulpits don't count.
 
Storing the boat inside would be my first choice if the price was right. There is no shrink wrap needed; less worry about snow, ice, rain, wind damaging the cover/boat. With the boat inside there is no sun beating down on the gelcoat on areas not proteced by the cover. Sealing up the boat may lead to mildew. Storing inside allows for a loser cover which will breath.
 
36' HEATED storage is just soooooooooooooo much easier on my comfort zone through the winter (yes I spend the money). If I want to "putz" around and take in a winter project, it works for me. And a lot less work getting her ready (MICHIGAN) for winter months.
 
quote:

Originally posted by Padraig

Why would shrink wrap be abrasive to a boat? I have had my 28 Velocity shrink wrapped and stored outside in the Buffalo, NY area (North Tonawanda). I have never observed any abrasion and I am quite anal about the boats appearance and I have had it wrapped for (9) winters. I suppose it depends on how well the shrink wrap is applied. I do have to use a little acetone to clean off some tape residue.




.

What exactly is the Tarp Garage? Is it purchased or put together?
 
quote:

Originally posted by CurrentSea

Why not outside in one of those tarp garages?
Shrink wrap definately ruins a boat, I don't care how it's done, it is abrasive.
If I had a boat that size, I would get one of those garages, back my boat into it, winterize it and be done.






Let me try it again, Tarp Garage? Is it purchased or how would you build? Thanks.
 
In Canada were it is real winter we just cover the boat over with a good plastic tarp from home depot I have found it helps keep the boat clean and alows it to breath rather than tight shrink wrap I leave the hatch open only on it;s little handel to get a bit of air flow throught the Carver I drop my Flybrige and canxas down. Inside storage one year and we had so much dust and Pigeon poop all over it It sure was a spring dissapointment not only that I worry about anything happening in the building like a fire or storm wipe out every thing and everybody all at once
 
Back
Top