- Joined
- Feb 1, 2007
- RO Number
- 25075
- Messages
- 1,698
In 2001 when I first purchased my 10 Meter Trojan International the bonding system wires had either been removed or were cut.
During my ownership, and during the refit I've replaced most of the bonding system, including each of the four stainless supports for the swim platform and most importantly, the fuel tank(s)
I replaced all of the thru-hulls and seacocks with BRONZE. For the time being, I am excluding the thru hulls and seacocks from the bonding system.
Apparently there has been some controversy regarding these systems and the benefits of eliminating galvanic corrosion & static electricity sparks as compared to the possible danger they may cause by transfering the tremendous electrical energy from a lightning strike.
Now that we've eliminated the fume explosion issue by converting to diesels, I'd like to hear what comments you all have regarding the merits of the bonding system itself and if eliminating the seacocks and thruhulls is a good idea.
Thanks,
RWS
During my ownership, and during the refit I've replaced most of the bonding system, including each of the four stainless supports for the swim platform and most importantly, the fuel tank(s)
I replaced all of the thru-hulls and seacocks with BRONZE. For the time being, I am excluding the thru hulls and seacocks from the bonding system.
Apparently there has been some controversy regarding these systems and the benefits of eliminating galvanic corrosion & static electricity sparks as compared to the possible danger they may cause by transfering the tremendous electrical energy from a lightning strike.
Now that we've eliminated the fume explosion issue by converting to diesels, I'd like to hear what comments you all have regarding the merits of the bonding system itself and if eliminating the seacocks and thruhulls is a good idea.
Thanks,
RWS