folks
when we used the windlass the first time this year it activated the breaker and stopped working. So when I got into dock I took the rope off the unit and ran it without any rope to draw. When I used the switch that causes it to pull rope into the boat it ran fairly freely and did not activate the breaker. But when I used the switch that normally would cause it to feed rope out into the lake it ran slower and activated the breaker. I did this a second time, and in the "pull rope in" position was fine, in the "let rope out" activation it slowed down, and then I used the " pull rope in position" again and it was a bit slower, then when I went to the "let rope out position" it ran slower and activated the breaker again. (don't you love my terminology !! lol)
it is a Lewmar Concept 1 with a 002 gypsy.
any ideas gang ??
__________________
Thank you
Larry
1997 3255 Avanti
7.4L Bravo 3's
Lake Erie, Ontario, Canada
when we used the windlass the first time this year it activated the breaker and stopped working. So when I got into dock I took the rope off the unit and ran it without any rope to draw. When I used the switch that causes it to pull rope into the boat it ran fairly freely and did not activate the breaker. But when I used the switch that normally would cause it to feed rope out into the lake it ran slower and activated the breaker. I did this a second time, and in the "pull rope in" position was fine, in the "let rope out" activation it slowed down, and then I used the " pull rope in position" again and it was a bit slower, then when I went to the "let rope out position" it ran slower and activated the breaker again. (don't you love my terminology !! lol)
it is a Lewmar Concept 1 with a 002 gypsy.
any ideas gang ??
__________________
Thank you
Larry
1997 3255 Avanti
7.4L Bravo 3's
Lake Erie, Ontario, Canada