Radio Protocol

Brian

Member
Member
Joined
Mar 2, 2000
RO Number
64
Messages
334
How many of you use your VHF regularly. When you do is there a specific protocol to use. I very rarely use the radio other than finding a weather update.
 
Find out your local hailing (calling channel) in most areas it is not channel 16 that is for monitoring CG announcements and distress calls. In my area of South Jersey it is channel 9 use it to call your buddies and then move off to another channel. In most areas use channel 13 when near bridges or requesting a bridge opening. Also you should monitor channel 16 when motoring along. Never ask for a radio check on channel 16 at least not in my area or you will find yourself being scolded by other boaters and even the CG. Regards Bill
 
Chapman's also has a section for official radio protocols...
 
You of course realize that you are required to monitor Channel 16 if you have a VHF aboard.
 
You have to monitor 16 if you have a radio on board, and you can hail on it to, if you do it right. They have gone to using 9 because there are so many people that don't know how to use the radio, they should have a CB, "you got your ears on" doesn't belong on 16, if you get what I mean, I'll just say it I'm not PC correct, stupid is what I meant. Stupid because they are on a boat with no training.
 
Boatsafe administers tests for many states ( I have NO connection to them ) and they have a useful page on their site relating to VHF usage. See it here.
 
listen to your radio when on the boat, you will quickly pick up the "protocol".

you will also pick up on local stuff... ex... in florida, it's ok to use 16 for radio checks... elsewhere it's no... or bridges are on ch 9 down here, not 16... etc...
 
What ever you do Brian, Learn the proper way to use your VHF. Here on the Tenn. River ( Chattanooga) you hear everything you can imagine on 16. It is so ridiculous, we are forever getting on to people about getting off of channel 16. We use it to call locks or Marinas but then we go to another channel to have our conversation.

Happy Boating
Taste of Grace
 
I run two VHF radios, one on channel 16, the other on working channel in the area--if there is a traffic separation scheme, such as in major harbors, on in some parts of the ICW, it is on that channel, some harbors it is 12. On the Gulf Coast ICw the bridge to bridge channel is 13. This where the commercial traffic gives their positions and intent. Scanning can miss certain critical information. For example there is one very narrow stretch of the ICW where vessels should give security transmissions that they are entering this section on channel 16 and 13. I was on 16 when the tug was on 13, and on 13 when the tug was 16, and both missed the securitie message. We met in the center--I had a 62 foot motorsailor, which I had to back a few hundred yards, until I could put the boat on the side of the ICW against a bank, and the tug pushing two barges could then squeeze by. After that I always monitered both channels.
 
Pascal pretty much described what we do in the Tampa area as well. We monitor the VHF constantly. We catch the weather one last time before leaving the slip then rely on the XM weather on the chartplotter after than. The only time we see (hear) abuse of the VHF is on holidays when the semi-annual boaters are out chatting it up on the radio. The Coast Guard, sherrif, fish & wildlife and local fire & rescue are pretty quick to clear the chatter.

Our primary use of the VHF is calling bridges, hailing a dock hand to the fuel dock at our favorite watering hole, hailing a marina for a slip assignment or dockage for dinner or the very rare occassion when we call the dock hands at our own marina for docking assistance in 25 kt. winds.
 
You will notice, quite often, that stations will include the channel number when they transmit _ "This is Condor on 16 ....". This is useful where there might be a question as to which channela to use. Luck. Dale
 
Please, if some one has a hot mic... don't ask them to get their finger off the button, they can't hear you if their button is pushed in :)
 
Here in the eastern Long Island Sound area, the Coast Guard also announces the channel they are on when calling. This is apparently because of the wide use of channel scanning, something my radios do but I find pretty useless for the reason that thataway4 mentioned. You always miss something during the scan delay.

Around here, the CG sends marine information, alerts regarding marine hazards and other essential traffic on channel 22A. They announce the upcoming message on Channel 16 and advise switching to 22A to hear it. I always do because every once in a while, they broadcast the position of a floating container or other hazard and it is always nice to know about those. During an emergency of some kind (boat taking on water, for instance), they move that traffic to 22A, too.

As we go down the Thames River toward Long Island Sound, we sometimes encounter a submarine returning from patrol or training. There is a lot of security around these boats and we are usually intercepted by a small CG patrol boat. One of crew members will hold up his hand and flash two fingers, twice, as he comes along side. That means switch to 22A for instructions, which are usually, "Extreme right-hand side of the channel, idle speed only and no photographs, please."

You really do need a radio around here.
 
I was under the impression that 16 was used just for emergencies and only that. No radio checks or anything other than emergencies.I thought the coast guard monitored that channnel. I thought this was a nationwide rule. Jim you say to contact on 9 then move to another channel. How do you know that bridges and others monitor a certain channel.Just local knowlegde???? Does everyone have contact with coast guard if needed?? If not what do you do in an emergency?
 
quote:

Originally posted by Brian

I was under the impression that 16 was used just for emergencies and only that. No radio checks or anything other than emergencies.I thought the coast guard monitored that channnel. I thought this was a nationwide rule. Jim you say to contact on 9 then move to another channel. How do you know that bridges and others monitor a certain channel.Just local knowlegde???? Does everyone have contact with coast guard if needed?? If not what do you do in an emergency?






Brian,

There appears to be minor variations from region to region. Here...Channel 16 is used for initial hailing, then switch to a working channel. 09 was set aside by the FCC as a secondary hailing channel to relieve 16. Bridge-to-bridge is 13. Locks and bridges (upper Mississippi river) are hailed on 14. 68,69,71,72 are working channels. CG is 22a

Going by the book, if you carry a VHF onboard, you are required to monitor channel 16 for emergencies.
 
Most people should be polite and business like, try not to think your on a CB radio. Nothing like: Hey Bubba ya got yar ears on?
 
According to the FCC ( Federal Candy Company ;)), channel 16 is reserved for Calling and Distress only. The proper usage, as defined, is that a user may call another boat, then change to another channel ( in this case, likely one assigned for recreational boat non-critical communications, such as 68 ). Again, according to da rules, "Thou shall not chat" on 16.

There is MUCH confusion about using channel 9 as a "boater calling frequency". It certainly is available for such use, but if you have one radio, and obey the rule to monitor 16, then you ( and everyone else ) will never hear a call on ch 9. The USCG has, from time to time, attempted to get boaters to switch to 9 and the FCC has not backed up this idea. Personally, my license is issued by the FCC, so I go with their rules...

As far as, "How many of you use your VHF regularly. When you do is there a specific protocol to use."

The VHF gets turned on after I raise the antennas, but before I turn on the GPS ( and before I start engines or untie from the dock ). It remains on, on Ch 16, unless I am in active communications on another channel. Protocol? Yes, sort of. You should use the proper channel for the type of communication you are doing. Wanna talk about that 7 lb trout you caught? Use Ch 68 ( or other Ch with the same usage assignment ).

And the most important protocol there is: NEVER INTERRUPT AN EMERGENCY COMMUNICATION. Listen ( esp on 16 ) before you press the key. Make sure that the channel really is not in use. Remember that emergency response might be able to hear both you and the boat that is on fire, even though you may not be able to hear the boat. Odds are that your call to "Bumboat" will prevent SAR from getting the location of the boat in distress.

-edit-

Robbins29, tks for the link to Part 80...

And here is the link to the channel assignment/usage list
 
Here's a reprint of an article published in our Marina's newsletter some time ago FYI;

VHF: What to Say

Part of staying safe on board your boat is being equipped with the best means of communication in case of an emergency. The VHF radio is the most common communication device. Many people do not know or simply do not use radio etiquette
when speaking on their marine radio. Channel 16 is monitored continuously by the Coast Guard. It is to be used for hailing and emergency purposes only. Therefore at any point there is a distress call on the radio do not interrupt the transmission. Cease all conversation until the “all clear” is heard.
Remember that channel 16 is a shared frequency that is used by boaters, marina staff and of course the Coast Guard. Knowing how to be concise and efficient and communicate what you need is much appreciated by everyone sharing the same channel. When you are communicating with another vessel or a marina, move conversation to another channel. Working channels include 69, 70,71,72 and 78.
Remember that you are not alone when talking on the marine radio. Respect others out there who may be listening to your communication. Be aware of whether your mike is keyed. When keyed and not in use, this prevents others from using their radio for transmission.
Above all else respect the importance of the VHF radio and use it responsibly.
 
There has been some good advise here. Using a standard style and format on the radio contributes to clear communication. The intrusion of CB style into marine VHF is lamentable, but seems to happening all over the country. It seems to go along with boats with names like "Get U Some". I don't believe a pleasure boat is required to monitor 16 just because it has a VHF radio installed aboard. The requirement is to monitor 16 if the radio is turned on. You are not required to have the radio turned on. Whether or not operating with the radio off is good seamanship is an entirely different question. Personally I don't always turn on the VHF in my 16' Boston Whaler if I am out on a deserted stretch of river tubing my kids. If I am in an area of the river with commercial traffic I will turn it on. It's a matter of context.
 
Back
Top