Removing adhesive to be painted?

[Smackhq]

Hello All,

I am remodeling an older boat interior that comprised mostly of nice green vinyl. The floor was easy to take up so I started working on the engine doghouse. Wasn't too hard to remove vinyl but I was left with a box that has lots of old adhesive glue on it. Not a great surface to paint or sand.
Any suggestions from someone out there on how to remove all the old adhesive and get it ready to accept paint?

Thanks.

 

[divedaddy]

Try 3M's General Purpose Adhesive Remover - work in small sections, soak it a bit, rub and then use a clean rag to remove the residue. It should take it off, but it may take a bit of patience and elbow work, depending on the adhesive used.

 

[Surfer]

or west m.'s brand of Adhesive Remover, citrus based, works well.
Buzz

 

[Mike Ryan]

or acetone

 

[Bondo]

A 4, 1/2" Angle Grinder,+ a Cup Brush is what the Pro's use..........

Wear a resperator,.... It gets Dusty.... But it's Quick........